Fullscreen HTML5Med Res (??MB)HTML4

Au V st is ro it N nic us o. s a G S t 45 ta nd TX1H / RX1 • Standard frequency 151.300MHz • Other frequencies from 120MHz to 180MHz • Data rates up to 10kbps TX1H Transmitter • 100 mW Transmitter • Usable range over 10km • Supply range: 3.8V - 15V • Current consumption: 80mA transmit • TX1H has same pin-out as TX1 RX1 Receiver • Single conversion NBFM superhet Image rejection >50dB • Operation from 2.7V to 12V <at> 12mA • Built-in regulator for improved stability noise rejection - 116dBm sensitivity <at> 1ppm BER • RSSI output with >80dB range Local oscillator leakage <-60dBm Enable facility TX2 / RX2 CE certified by independent Notified Body • Data rates up to 160 kbps • Usable range up to 300 m • Operates on 433.92 MHz TX2 Transmitter (25 mW version available) • Operation from 2.2V to 6V +9dBm on 433.92MHz • High efficiency, >15%, DC RF 2nd harmonic RX2 Receiver • Double conversion FM superhet • SAW front end filter, image rejection 50dB • Supply 3.0V to 6.0V <at> 13mA -107 dBm sensitivity <at> 1ppm BER with 14kbps-version • LO leakage, < -60 dBm Radiometrix modules are suitable for Australian and New Zealand markets. The modules are capable of long range performance of up to 10 Km and are a cost-effective solution to wireless data transmission problems. A range of frequencies are available including: 151.300 MHz (100 mW) 173.225 MHz (100 mW) 433.92 MHz (25 mW) 918.525MHz 106  Silicon Chip BiM1 BiM1 Transceiver • Standard frequency 151.300MHz • Available separately as BiM1T transmitter and BiM1R receiver • Data rates up to 10kbps for standard module • Usable range over 10km Feature-rich interface (RSSI, analogue and digital baseband) • Supply range: 100mW Transmitter 3.8V - 15V, Receiver: 3.0V - 15V • Current consumption: 80mA transmit, 8mA receive • RSSI output with >60dBm range 10kbps, -120dBm sensitivity (for 12 dB SINAD) BiM2 BiM2 Transceiver • Usable range to 200 metres external, 50 metres in building • Operates on 433.92 MHz • Data rates up to 160kbps • SAW controlled 10mW FM transmitter • Double conversion FM superhet receiver • SAW front end filter and full screening • 3V or 5Volt supply at < 20mA Revised pricing structure for Australia! Same great products at lower prices! Contact our NEW Australian & New Zealand distributor for sales information RF Modules Australia P.O. Box 1957 Launceston TAS, 7250 Tel: +61 3-6331-6789 Fax: +61 3-6331-1243 sales<at>rfmodules.com.au www.rfmodules.com.au siliconchip.com.au Full technical details are available online at: www.radiometrix.com