Silicon ChipOuter Back Cover - August 2015 SILICON CHIP
  1. Outer Front Cover
  2. Contents
  3. Publisher's Letter: Electrical safety standards are not being observed
  4. Feature: A Look At Biohacking by Dr David Maddison
  5. Feature: Nikon’s Incredible P900 Camera by Kevin Poulter
  6. Project: Ultra-LD Mk.4 200W RMS Power Amplifier, Pt.1 by Nicholas Vinen
  7. Project: Accurate Voltage/Current/Resistance Reference by Nicholas Vinen
  8. Feature: DMM Calibration by Nicholas Vinen
  9. Feature: Battery Fighters Won’t Leave You Stranded by Ross Tester
  10. Review: Keysight 34470A 7.5-Digit Multimeter by Nicholas Vinen
  11. Product Showcase
  12. Feature: Electronex: The Electronics Design & Assembly Expo by Silicon Chip
  13. Project: Build A Driveway Monitor, Pt.2 by John Clarke
  14. Project: LED Party Strobe Mk2 by Ross Tester
  15. Feature: Here is Me – And Here is Mini-Me! by Kevin Poulter & Ross Tester
  16. Vintage Radio: The 1955 Fleetwood 4-Valve 1003 by Associate Professor Graham Parslow
  17. Subscriptions
  18. PartShop
  19. Market Centre
  20. Notes & Errata
  21. Advertising Index
  22. Outer Back Cover

This is only a preview of the August 2015 issue of Silicon Chip.

You can view 43 of the 112 pages in the full issue, including the advertisments.

For full access, purchase the issue for $10.00 or subscribe for access to the latest issues.

Items relevant to "Ultra-LD Mk.4 200W RMS Power Amplifier, Pt.1":
  • Ultra-LD Mk.4 Amplifier PCB [01107151 RevC] (AUD $15.00)
  • Ultra-LD Mk3/Mk4 Amplifier Power Supply PCB [01109111] (AUD $15.00)
  • Ultra-LD Mk.4 Amplifier prototype PCB [01107151 RevB] (AUD $2.50)
  • 2 x HN3A51F + 1 x IMX8-7-F + 2 x BC846C transistors for the Ultra-LD Mk.4 Power Amplifier module (Component, AUD $5.00)
  • SA156 plastic bobbin (Component, AUD $1.00)
  • Ultra-LD Mk.3 Power Supply PCB pattern (PDF download) [01109111] (Free)
  • Ultra-LD Mk.4 Amplifier PCB pattern (PDF download) [01107151 RevC] (Free)
Articles in this series:
  • Ultra-LD Mk.4 200W RMS Power Amplifier: Preview (July 2015)
  • Ultra-LD Mk.4 200W RMS Power Amplifier, Pt.1 (August 2015)
  • Ultra-LD Mk.4 200W RMS Power Amplifier, Pt.2 (September 2015)
  • Ultra-LD Mk.4 Power Amplifier, Pt.3: 110W Version (October 2015)
Items relevant to "Accurate Voltage/Current/Resistance Reference":
  • Low-Cost, Accurate Voltage/Resistance/Current Reference PCB [04108151] (AUD $2.50)
  • SMD parts for the Low-Cost, Accurate Voltage/Resistance/Current Reference (1.8V) (Component, AUD $15.00)
  • SMD parts for the Low-Cost, Accurate Voltage/Resistance/Current Reference (2.5V) (Component, AUD $15.00)
  • Low-Cost, Accurate Voltage/Resistance/Current Reference PCB pattern (PDF download) [04108151] (Free)
Items relevant to "Build A Driveway Monitor, Pt.2":
  • Driveway Monitor detector/transmitter PCB [15105151] (AUD $10.00)
  • Driveway Monitor receiver PCB [15105152] (AUD $5.00)
  • PIC16F88-I/P programmed for the Driveway Monitor detector/transmitter [1510515C.HEX] (Programmed Microcontroller, AUD $15.00)
  • PIC12F675-I/P programmed for the Driveway Monitor receiver [1510515B.HEX] (Programmed Microcontroller, AUD $10.00)
  • Firmware (HEX) files and source code for the Driveway Monitor [1510515C/B.HEX] (Software, Free)
  • Driveway Monitor PCB patterns (PDF download) [15105151/15105152] (Free)
  • Driveway Monitor panel artwork (PDF download) (Free)
Articles in this series:
  • Build a Driveway Monitor, Pt.1 (July 2015)
  • Build A Driveway Monitor, Pt.2 (August 2015)
Items relevant to "LED Party Strobe Mk2":
  • LED Party Strobe PCB [16101141] (AUD $7.50)
  • LED Party Strobe PCB pattern (PDF download) [16101141] (Free)

Purchase a printed copy of this issue for $10.00.
T S A L B SANDBLASTING! S G IN H T LL A R O F OP 3x YOUR ONE STOP SH 215 SBP- (S33 • • • • 20 SB-4 00 SB-1 $195 9 $1,30 $187 4) (S28 19 litre capacity Portable on wheels Includes blast gun 1/16" & 1/8" air jet • • • • (S30 8) 1200 x 600 x 340-570mm Requires 680L/min air Tempered glass screen Built in 240V vacuum filter system • Includes blast gun, light and gloves 9 $1,85 9) (S30 835 x 510 x 360-550mm Requires 340L/min air Acrylic protective screen Includes blast gun, light and gloves 75 SB-3 $946 ET GARN GARNET BEAD Tough, durable garnet grains produce far less dust when blasting 020-040 coarse (S295) 030-060 medium (S296) FLIP-U FRON P DOOR T ! 990 SBC- $289 • • • • 2) • • • • 590 x 500 x 300-360mm Requires 254L/min air Acrylic protective screen Includes blast gun, light and gloves 00 SB-2 (S28 ACCE DOOR SS S! (S30 A $25E 0) 2x ACCE DOOR SS S! 5) • • • • 1175 x 885 x 625-845mm Requires 680L/min air Tempered glass screen Built in 240V vacuum filter system • Includes blast gun, light and gloves S GLAS GLASS BEAD Fine grit for metal finishing peening, cleaning &de-burring -300+105 (S297) $49 SANDBLASTING EQUIPMENT • • • • 940 x 600 x 340-580mm Requires 340L/min air Tempered glass screen Built in 240V vacuum filter system • Includes blast gun, light and gloves When it comes to removing dirt, paint and unwanted finishes from your job or project, HAFCO definately have you covered with many sandblasting models to choose from. They range from a portable style unit right up to their free standing R 16 SUPE 5 $1,2945) COMPRESSORS (C3 0V VACUUM BUILT IN 24 STEM FILTER SY USE THIS PROMO CODE, AND RECEIVE THESE GREAT OFFERS ONLINE OR INSTORE! 4BLASTOFF OFFER ENDS 26-08-15 cabinet type with light & filter system for all the larger & industrial applications. Simply connect an air hose, 240V power depending on model, add your preferred media then aim gun and it’s “Ready, Set, BLAST OFF!” K30 5 $3,09 525) (C machineryhouse.com.au SUPER 16 • 328L/min free air delivery • 125L air receiver • 2.25kW/3hp, 240V motor K30 • 681L/min free air delivery • 147L air receiver • 5.5kW/7.5hp, 415V motor Sydney Brisbane Melbourne Perth (02) 9890 9111 (07) 3274 4222 (03) 9212 4422 (08) 9373 9999 1/2 Windsor Rd, Northmead 625 Boundary Rd, Coopers Plains 1 Fowler Rd, Dandenong 41-43 Abernethy Rd, Belmont 08_SC_300715