Au V
st is
ro it
N nic us
o. s a
G S t
45 ta
nd
TX1H / RX1
• Standard frequency 151.300MHz
• Other frequencies from 120MHz
to 180MHz
• Data rates up to 10kbps
TX1H Transmitter
• 100 mW Transmitter
• Usable range over 10km
• Supply range: 3.8V - 15V
• Current consumption:
80mA transmit
• TX1H has same pin-out as TX1
RX1 Receiver
• Single conversion NBFM superhet
Image rejection >50dB
• Operation from 2.7V to 12V <at> 12mA
• Built-in regulator for improved stability noise rejection - 116dBm sensitivity <at> 1ppm BER
• RSSI output with >80dB range
Local oscillator leakage <-60dBm
Enable facility
TX2 / RX2
CE certified by independent
Notified Body
• Data rates up to 160 kbps
• Usable range up to 300 m
• Operates on 433.92 MHz
TX2 Transmitter (25 mW version available)
• Operation from 2.2V to 6V
+9dBm on 433.92MHz
• High efficiency, >15%, DC RF
2nd harmonic
RX2 Receiver
• Double conversion FM superhet
• SAW front end filter, image
rejection 50dB
• Supply 3.0V to 6.0V <at> 13mA
-107 dBm sensitivity <at> 1ppm BER
with 14kbps-version
• LO leakage, < -60 dBm
Radiometrix modules are suitable for Australian
and New Zealand markets. The modules are
capable of long range performance of up to 10
Km and are a cost-effective solution to wireless
data transmission problems.
A range of frequencies are available including:
151.300 MHz (100 mW)
173.225 MHz (100 mW)
433.92 MHz (25 mW)
918.525MHz
106 Silicon Chip
BiM1
BiM1 Transceiver
• Standard frequency 151.300MHz
• Available separately as BiM1T
transmitter and BiM1R receiver
• Data rates up to 10kbps for standard module
• Usable range over 10km
Feature-rich interface (RSSI, analogue and digital baseband)
• Supply range: 100mW Transmitter
3.8V - 15V, Receiver: 3.0V - 15V
• Current consumption: 80mA transmit, 8mA receive
• RSSI output with >60dBm range
10kbps, -120dBm sensitivity (for
12 dB SINAD)
BiM2
BiM2 Transceiver
• Usable range to 200 metres external, 50 metres in building
• Operates on 433.92 MHz
• Data rates up to 160kbps
• SAW controlled 10mW FM transmitter
• Double conversion FM
superhet receiver
• SAW front end filter and
full screening
• 3V or 5Volt supply at < 20mA
Revised pricing
structure for Australia!
Same great products at
lower prices!
Contact our NEW Australian & New Zealand
distributor for sales information
RF Modules Australia
P.O. Box 1957
Launceston
TAS, 7250
Tel: +61 3-6331-6789
Fax: +61 3-6331-1243
sales<at>rfmodules.com.au
www.rfmodules.com.au
siliconchip.com.au
Full technical details are available online at:
www.radiometrix.com