 |
Matte Black UB1 Lid for the Deluxe Touchscreen eFuse
A lid laser cut from 3mm black acrylic which replaces the lid supplied with a UB1 "Jiffy" box. Attaches with the supplied screws (longer self-tapping screws may be required, depending on what comes with the box). The external side can be either matte or gloss black.
The Deluxe eFuse PCB is mounted on the rear of the lid using four M3 machine screws, with the touch-screen flush with the top surface. The cut-out is sized to leave minimal clearance around the screen. There are also profiled holes to mount the six binding posts.
158 x 96.5mm.
Note: after removing the protective film, you may need to clean off some glue residue using a damp cloth.
Also note: the BUK7909-75AIE SenseFETs are no longer manufactured so check you can get those (or equivalents) before buying any parts for this project.
| Cat No SC4316. Price: AUD $7.50 1 |
 |
Add to trolley (available until stock is exhausted) |
In stock:  yes (44 available). Estimated dispatch time: 1-3 days | | Related to:
|
Other items relevant to these projects: |
|
