Kits / Part Sets - Silicon Chip Shop

Silicon Chip Shop - Kits / Part Sets (search for shop items within this category)

Micromite LCD BackPack V1 complete kit

A kit of all the parts required to build the 2.8-inch version of the Micromite LCD BackPack. See the parts list link below for details on what is included.

The PCBs, programmed microcontroller and regulator are also available separately.

PLEASE NOTE: the 10µF and 47µF capacitors supplied are non-polarised SMD ceramic types. They have no markings and can be installed either way around. You can tell them apart as the 10µF capacitors are in a pack of two.

For assembly instructions, see the article in the February 2016 issue.

Also note: kits include 4 x 6mm machine screws, 4 x 10mm (or 8mm) machine screws and 4 x 3mm ID 6mm OD 1mm thick Nylon spacers. The longer screws & spacers are to attach the BackPack to the supplied lid. If not using the lid, place the washers under the 10mm screw heads.

Programmed with: Lid colour:

Cat No SC3321. Price: AUD $65.00 ¹

Add to trolley (available until stock is exhausted)

In stock:

yes (12 available). Estimated dispatch time: 1-3 days

Related to:

Project: Micromite LCD BackPack With Touch-Screen Display (February 2016 [print issue] [online issue])
Project: Touchscreen Digital Preamp with Tone Control – Part 1 (September 2021 [print issue] [online issue])
Project: Touchscreen Digital Preamp with Tone Control – Part 2 (October 2021 [print issue] [online issue])

Other items relevant to these projects:

Touchscreen & Remote Digital Preamp with Tone Control:

Touchscreen Digital Preamp PCB [01103191] ($12.50) Add to trolley
Touchscreen Digital Preamp ribbon cable/IR adaptor PCB [01103192] ($2.50) Add 2 to trolley
PIC32MX170F256B-50I/SP programmed for the Touchscreen Digital Preamp, 2.8in screen version [0110319A.hex] ($15.00) Add to trolley
PIC32MX170F256B-50I/SP programmed for the Touchscreen Digital Preamp, 3.5in screen version [0110319B.hex] ($15.00) Add to trolley
Micromite LCD BackPack V3 complete kit ($75.00) Add to trolley (with default options)
Micromite LCD BackPack V2 complete kit ($70.00) Add to trolley (with default options)
Firmware for the Touchscreen Digital Preamp (Free) Add to trolley
Touchscreen Digital Preamp PCB patterns (PDF download) [01103191/2] (Free) Add to trolley

Micromite LCD BackPack With Touch-Screen Display:

Kit parts list

	1 × Micromite LCD BackPack PCB [2.8-inch version) [07102122]
	1 × Clear UB3 Lid for 2.8-inch Micromite LCD BackPack (varies with options)
	1 × 4-pin tactile switch, black 6×6mm (1mm actuator)
	1 × 100Ω vertical mounting side-adjust trimpot
	1 × MCP1700 3.3V LDO (TO-92)
	1 × 2.8-inch TFT Touchscreen LCD module with SD card socket

Connectors

	1 × 22-pin male header (2.54mm pitch)
	1 × 6-pin male right-angle header (2.54mm pitch)
	1 × 28-pin narrow DIL dual wipe IC socket (DIP-28)
	1 × 14-pin female socket (2.54mm pitch)

Semiconductors

1 × PIC32MX170F256B-50I/SP programmed for the Micromite Mk.2 (varies with options)

Through-hole Capacitors

	2 × 100nF 50V X7R (5mm pitch)
	1 × 22µF 6.3V X7R ceramic
	2 × 10µF 16V X7R ceramic

Through-hole Resistors

1 × 10kΩ ±1% ¼W

Cable & Hardware

	4 × 12mm Nylon M3 spacer
	4 × 8mm blackened metal panhead M3 screw
	4 × 6mm blackened metal panhead M3 screw
	4 × 3mm ID 6mm OD 1mm thick Nylon M3 flat washer

Subscribers receive a discount on this item. Move the pointer over the price for details.
If you are subscriber, log in to apply your discounts. Otherwise, you may subscribe at the same time as you purchase this item to get the discount.
This discount is not cumulative with any other discounts, including volume discounts.