 |
Micromite LCD BackPack kit (programmed for Voltage/Current Reference)
THIS IS NOT A COMPLETE KIT FOR THE VOLTAGE/CURRENT REFERENCE.
A kit of all the parts required to build the 2.8-inch version of the Micromite LCD BackPack. See the parts list link below for details on what is included.
To build this project, you also need to either purchase the short form kit (available separately), which provides you with most of the remaining components, or the main PCB and acquire the remaining components elsewhere.
For assembly instructions, see the article in the February 2016 issue.
PLEASE NOTE: the 10µF and 47µF capacitors supplied are non-polarised SMD ceramic types. They have no markings and can be installed either way around. You can tell them apart as the 10µF capacitors are in a pack of two.
| Lid colour: |
| Cat No SC4074. Price: AUD $70.00 1 |
 |
Add to trolley (available until stock is exhausted) |
In stock:  no. Estimated dispatch time: approximately 1 week | | Related to:
|
Other items relevant to these projects: |
Kit parts list
Connectors | 1 × 22-pin male header (2.54mm pitch) |
| 1 × 6-pin male right-angle header (2.54mm pitch) |
| 1 × 28-pin narrow DIL dual wipe IC socket (DIP-28) |
| 1 × 14-pin female socket (2.54mm pitch) |
Semiconductors
Through-hole Capacitors
Through-hole Resistors
Cable & Hardware | 4 × 12mm Nylon M3 spacer |
| 4 × 8mm blackened metal panhead M3 screw |
| 4 × 6mm blackened metal panhead M3 screw |
| 4 × 3mm ID 6mm OD 1mm thick Nylon M3 flat washer |
|
|
