Kits / Part Sets -
Silicon Chip
Shop
Issues
Articles
Shop
Videos
Subscribe
Account
Indexes
Help, Contact & FAQ
Silicon Chip
Shop - Kits / Part Sets
(search for shop items within this category)
Short-form kit for the Shirt Pocket Audio Oscillator
A kit of most of the parts needed to build the Shirt Pocket Audio Oscillator.
You just need to add some lengths of wire - no wire is included in the kit. Everything else you need is, including the knobs and battery clips.
Note: photo shows assembled prototype
Cat No SC5622. Price: AUD $42.50
1
Add to trolley
(available until stock is exhausted)
In stock:
yes (2 available). Estimated dispatch time: 1-3 days
Related to:
Project: A shirt-pocket Sized Audio DDS Oscillator
(September 2020
[print issue]
[online issue]
)
Other items relevant to this project:
Shirt Pocket Audio Oscillator PCB [01110201]
($2.50)
Add to trolley
8-pin ATtiny Programming Adaptor Board [01110202]
($1.50)
Add to trolley
ATtiny85V-10PU programmed for the Shirt Pocket Audio Oscillator [0111020A.HEX]
($10.00)
Add to trolley
Pulse-type rotary encoder with pushbutton and 18t spline shaft
($3.00)
Add to trolley
64x32 white OLED screen (0.49-inch, 1.25cm diagonal)
($10.00)
Add to trolley
Firmware and 3D printing files for the Shirt-pocket Sized Audio DDS Oscillator
(Free)
Add to trolley
Shirt Pocket Audio Oscillator PCB pattern (PDF download) [01110201]
(Free)
Add to trolley
8-pin ATtiny Programming Adaptor Board PCB pattern (PDF download) [01110202]
(Free)
Add to trolley
Shirt Pocket Oscillator front panel artwork (PDF download)
(Free)
Add to trolley
Kit parts list
1 × 8MHz crystal (low-profile HC-49)
1 × pulse-type rotary encoder with pushbutton and short 18t spline shaft switch
1 × 15mH 60mA inductor (17156C)
1 ×
Shirt Pocket Audio Oscillator PCB [01110201]
1 × DPDT slide switch (solder tags)
1 × 9mm 1kΩ linear vertical potentiometer (6mm 18t spline shaft)
1 × 3D printed case pieces for Shirt Pocket Audio Oscillator (front & back)
1 ×
64×32 white OLED screen (0.49-inch, 1.25cm diagonal)
Connectors
1 × 8-pin DIL dual wipe IC socket (DIP-8)
1 × 4-pin female socket (2.54mm pitch)
Semiconductors
1 ×
ATtiny85V-10PU programmed for the Shirt Pocket Audio Oscillator [0111020A.HEX]
Through-hole Capacitors
1 × 4.7µF 50V electrolytic
1 × 100nF 50V Y5V (5mm pitch)
2 × 33nF greencap
1 × 10nF greencap
1 × 470pF 50V ceramic disc
2 × 15pF 50V ceramic disc
Through-hole Resistors
1 × 10kΩ ±1% ¼W
1 × 3.9kΩ ±1% ¼W
1 × 1.8kΩ ±1% ¼W
1 × 1kΩ ±1% ¼W
Cable & Hardware
2 × Small diameter, no skirt knob (to suit 18t spline shaft)
1 × 2 x AAA loose battery clips
1 × Red & black pair alligator clips
Subscribers receive a discount on this item. Move the pointer over the price for details.
If you are subscriber, log in to apply your discounts. Otherwise, you may subscribe at the same time as you purchase this item to get the discount.
This discount is not cumulative with any other discounts, including volume discounts.