 |
Complete kit for the Champion+Pre-champion
A kit that includes all the parts needed to build the Champion and Pre-Champion, as described in the January 2013 issue. Click the link immediately below to see everything that's included in the kit.
The only parts you might need to add are some extra terminal blocks, screws, spacers etc if you decide to cut the board in half and use it as two separate boards.
Note: photo shows assembled kit. Some components may vary in appearance.
| Cat No SC6373. Price: AUD $30.00 1 |
 |
Add to trolley (available until stock is exhausted) |
In stock:  yes (48 available). Estimated dispatch time: 1-3 days | | Related to: Project: The Champion Preamp/Audio Amplifier Module (January 2013 [print issue] [online issue]) |
Other items relevant to this project: |
Kit parts list
Connectors | 1 × 8-pin DIL dual wipe IC socket (DIP-8) |
| 4 × 2-way mini horizontal terminal block, 5.08mm pitch (blue, small, Philips) |
Semiconductors | 1 × AN7511 bridged audio amplifier IC (DIP-8) |
| 1 × LMC6482AIN dual CMOS rail-to-rail op amp IC (DIP-8) |
| 1 × LP2950ACZ-5.0 5V 100mA LDO regulator (TO-92) |
| 1 × BC557B 45V 100mA PNP transistor (TO-92) |
| 1 × 1N5819 40V 1A schottky diode (DO-41) |
Through-hole Capacitors | 1 × 470µF 16V low-ESR electrolytic capacitor |
| 2 × 100µF 16V electrolytic |
| 3 × 10µF 50V electrolytic (2.5mm pitch) |
| 1 × 1µF 50V electrolytic |
| 1 × 470nF 50V X7R ceramic |
| 3 × 100nF 50V X7R (5mm pitch) |
| 3 × 100pF 50V ceramic disc |
| 2 × 10pF 50V ceramic disc |
Through-hole Resistors | 4 × 2.2MΩ ±1% ¼W |
| 1 × 1MΩ ±1% ¼W |
| 2 × 100kΩ ±1% ¼W |
| 2 × 22kΩ ±1% ¼W |
| 5 × 10kΩ ±1% ¼W |
| 2 × 2.2kΩ ±1% ¼W |
| 2 × 1kΩ ±1% ¼W |
| 3 × 100Ω ±1% ¼W |
Cable & Hardware | 2 × Shakeproof M3 washer (toothed type) |
| 1 × Shakeproof M3 washer (split/spring type) |
| 4 × 10mm Nylon M3 spacer |
| 4 × 6mm blackened metal panhead M3 screw |
| 1 × 10mm blackened metal panhead M3 screw |
| 2 × Stainless or carbon steel M3 hex nut |
| 1 × Knob to suit 6mm 18-tooth spline shaft, with skirt & white pointer |
| 1 × TO-220 silicone insulating pad heatsink |
| 1 × TO-220 micro-U flag heatsink (15 × 10 × 20mm) |
|
|
