 |
VGA PicoMite short-form kit
A set of parts to build the VGA PicoMite witnout a case. The Raspberry Pi Pico is supplied pre-programmed and tapped spacers are included to use as feet. Headers and sockets are also supplied to make the Pico pluggable.
You will need to add a power supply, keyboard, monitor and optionally an SD card (or micro SD card with full-size adaptor).
The I/O header supplied is the standard vertical type. If you want to build it into a case, you will need the case, a 40-pin right-angle box header and four No.4 x 5mm self-tapping screws.
Note: photo shows assembled kit with green PCB (blue supplied).
|
