Kits / Part Sets - Silicon Chip Shop

Silicon Chip Shop - Kits / Part Sets (search for shop items within this category)

Complete Kit for the Digital Boost Regulator/Breakout Board

A set of all the parts needed to build the Digital Boost Regulator, including a pre-programmed chip.

Click the link below to see a list of all the parts included. Note: the photo shows the kit after assembly.

PCB colour preference:

Cat No SC6597. Price: AUD $30.00 ¹

Add to trolley (available until stock is exhausted)

In stock:

yes (33 available). Estimated dispatch time: 1-3 days

Related to: Project: Digital Boost Regulator (December 2022 [print issue] [online issue])

Other items relevant to this project:

Kit parts list

	1 × 7FB5461BB 14mm 4-digit 7-segment CA LED display (blue)
	1 × 47µH 1.1A 6×6mm inductor (NR6045T470M)
	1 × Digital Boost Regulator with breakout board PCB [24110224] (green) (varies with options)

Connectors

	1 × Mini-USB connector
	1 × 4-pin male header (2.54mm pitch)
	1 × 5-pin male right-angle header (2.54mm pitch)

Semiconductors

	1 × PIC16F18146-I/SO‎ programmed for the Digital Boost Regulator [2411022A.HEX]
	1 × 2N7002K 60V 300mA N-channel Mosfet (SOT-23)
	1 × SS34 [SMD 1N5822 equivalent] 40V 3A schottky diode (DO-214AB)

SMD Capacitors

	2 × 10µF 25V M3216/1206 X7R
	1 × 100nF 50V M3216/1206 X7R

SMD Resistors

	3 × 10kΩ ±1% M3216/1206 ¼W
	9 × 1kΩ ±1% M3216/1206 ¼W

Subscribers receive a discount on this item. Move the pointer over the price for details.
If you are subscriber, log in to apply your discounts. Otherwise, you may subscribe at the same time as you purchase this item to get the discount.
This discount is not cumulative with any other discounts, including volume discounts.