Kits / Part Sets - Silicon Chip Shop

Silicon Chip Shop - Kits / Part Sets (search for shop items within this category)

Raspberry Pi Pico W BackPack kit

A kit of all the parts needed to build the Raspberry Pi Pico W BackPack module, including the PCB and all the optional components except for the DS3231 real-time clock IC (available separately). See the link below for a full list of parts included in the kit.

This kit also includes four 1mm-thick Nylon washers, and four of the eight M3 screws are 8mm long, so you can either build it as a standalone module or mount it to a panel. That includes mounting it in a UB3 Jiffy box using our laser-cut acrylic lid (also sold separately, see below).

Note: photo shows the assembled Pico W BackPack module with the optional RTCC IC fitted.

Cat No SC6625. Price: AUD $85.00 ¹

Add to trolley

In stock:

yes (6 available). Estimated dispatch time: 1-3 days

Related to: Project: Raspberry Pi Pico W BackPack (January 2023 [print issue] [online issue])

Other items relevant to this project:

Pico BackPack stereo jack socket adaptor PCB [07101222] and connectors ($2.50) Add to trolley
Raspberry Pi Pico BackPack PCB [07101221] ($5.00) Add to trolley (with default options)
DS3231MZ real-time clock IC (SOIC-8) ($10.00) Add to trolley
DS3231 real-time clock IC (SOIC-16) ($7.50) Add to trolley
3.5-inch TFT Touchscreen LCD module with SD card socket ($35.00) Add to trolley
Matte/Gloss Black UB3 Lid for Advanced GPS Computer (BackPack V3) or Pico BackPack ($5.00) Add to trolley
Matte/Gloss Black UB3 Lid for Micromite LCD BackPack V3 or Pico BackPack using 3.5in screen ($5.00) Add to trolley
Raspberry Pi Pico W BackPack software (Free) Add to trolley
Raspberry Pi Pico BackPack PCB pattern (PDF download) [07101221] (Free) Add to trolley

Kit parts list

	1 × 4-pin tactile switch, black 6×6mm (1mm actuator)
	1 × Raspberry Pi Pico BackPack PCB [07101221]
	1 × Raspberry Pi Pico W
	1 × 3.5-inch TFT Touchscreen LCD module with SD card socket

Connectors

	1 × MicroSD connector (standard)
	1 × CR2032 coin cell holder
	2 × jumper shunt
	1 × 67-pin male header (2.54mm pitch)
	1 × 14-pin female socket (2.54mm pitch)

Semiconductors

	1 × TSOP33436 infrared receiver IC (SIP-3)
	1 × MCP6272T-E/SN dual op amp IC (SOIC-8)
	1 × 2N7002K 60V 300mA N-channel Mosfet (SOT-23)
	1 × SSM3J372R,LF 30V 6A P-channel Mosfet (SOT-23)

SMD Capacitors

	4 × 10µF 25V M3216/1206 X7R
	4 × 100nF 50V M3216/1206 X7R
	2 × 1nF 50V M3216/1206 X7R or C0G/NP0

SMD Resistors

	4 × 100kΩ ±1% M3216/1206 ¼W
	2 × 47kΩ ±1% M3216/1206 ¼W
	2 × 22kΩ ±1% M3216/1206 ¼W
	3 × 10kΩ ±1% M3216/1206 ¼W
	2 × 4.7kΩ ±1% M3216/1206 ¼W
	2 × 1kΩ ±1% M3216/1206 ¼W
	1 × 470Ω ±1% M3216/1206 ¼W
	3 × 100Ω ±1% M3216/1206 ¼W

Cable & Hardware

	4 × 12mm Nylon M3 spacer
	4 × 8mm blackened metal panhead M3 screw
	4 × 6mm blackened metal panhead M3 screw
	4 × 3mm ID 6mm OD 1mm thick Nylon M3 flat washer

Subscribers receive a discount on this item. Move the pointer over the price for details.
If you are subscriber, log in to apply your discounts. Otherwise, you may subscribe at the same time as you purchase this item to get the discount.
This discount is not cumulative with any other discounts, including volume discounts.