Kits / Part Sets - Silicon Chip Shop

Silicon Chip Shop - Kits / Part Sets (search for shop items within this category)

Basic RF Signal Generator short-form kit

A mostly-complete kit for the AD9834-based RF Signal Generator. Click the link below to see what's included in the kit.

Besides this kit, you just need the case, the AA cells and the optional output level adjustment pot (if you plan to fit it).

Note: the photo shows the assembled board. Some parts may have a different appearance than those shown.

Cat No SC6656. Price: AUD $100.00 ¹

Add to trolley (available until stock is exhausted)

In stock:

yes (10 available). Estimated dispatch time: 1-3 days

Related to: Project: Basic RF Signal Generator (June 2023 [print issue] [online issue])

Other items relevant to this project:

Kit parts list

	1 × 1.8µH M2012/0805 high-Q inductor (LQW21HN1R8J00L)
	1 × 1.5µH M2012/0805 high-Q inductor (LQW21HN1R5J00L)
	1 × 820nH M2012/0805 high-Q inductor (IMC0805ERR82J01)
	1 × 3.3µH axial inductor
	2 × Solder tag miniature SPDT two-position latching toggle switch
	1 × Basic RF Signal Generator main PCB (CSE221001]
	1 × AD9834-based RF DDS signal generator module
	1 × 0.96in cyan OLED with SSD1306 controller
	1 × Pulse-type rotary encoder with pushbutton and 18t spline shaft
	1 × Basic RF Signal Generator front panel PCB (CSE220902B)

Connectors

	1 × jumper shunt
	1 × 28-pin narrow DIL dual wipe IC socket (DIP-28)
	1 × 4-pin female socket (2.54mm pitch)
	1 × 3-way vertical polarised header with matching plug & pins (2.54mm pitch)
	1 × 2-way vertical polarised header with matching plug & pins (2.54mm pitch)
	1 × 2×8-pin gold-plated male header (2.54mm pitch)

Semiconductors

	1 × ATmega328P programmed with the firmware for the 110dB RF Attenuator [CSE211003.HEX]
	1 × MCP1661T-E/OT boost regulator (SOT-23-5)
	1 × 2N7002K 60V 300mA N-channel Mosfet (SOT-23)
	1 × MBR0540 50V 500mA schottky diode (SOD-123)

SMD Capacitors

	2 × 10µF 16V M2012/0805 X5R
	1 × 470nF 50V M2012/0805 X7R
	5 × 100nF 50V M2012/0805 X7R
	1 × 33pF 50V M2012/0805 C0G/NP0
	1 × 30pF 50V M2012/0805 C0G/NP0

SMD Resistors

	1 × 330kΩ ±1% M2012/0805 ⅛W
	1 × 120kΩ ±1% M2012/0805 ⅛W
	5 × 4.7kΩ ±1% M2012/0805 ⅛W
	2 × 1.2kΩ ±1% M2012/0805 ⅛W
	1 × 1kΩ ±1% M2012/0805 ⅛W

Cable & Hardware

	2 × 3.2mm ID 5mm OD 8mm long plastic untapped spacer
	2 × 3.2mm ID 5mm OD 5mm long plastic untapped spacer
	2 × 12mm Nylon M3 spacer
	2 × 6mm metal panhead M3 screw
	2 × 6mm metal countersunk head M3 screw
	2 × 16mm metal panhead M2 screw
	2 × 12mm metal countersunk head M2 screw
	4 × M2 hex nut
	1 × Medium, white face knob
	1 × Double-sided foam-core tape pad, 39 × 61 × 1.5mm
	2 × 10-way IDC line socket connector
	1 × 2 × AA battery holder
	1 × 7cm length of 10-way ribbon cable

Subscribers receive a discount on this item. Move the pointer over the price for details.
If you are subscriber, log in to apply your discounts. Otherwise, you may subscribe at the same time as you purchase this item to get the discount.
This discount is not cumulative with any other discounts, including volume discounts.