 |
K-Type Thermocouple Thermometer/Thermostat short-form kit
A kit that includes most of the parts you need to build the Thermometer/Thermostat. Click the link immediately below to see a list of everything that's included in the kit.
What isn't included: the case, LCD screen, thermocouple probe or cable gland. Pretty much everything else is included.
Note: the photo shows the assembled kit, including some parts that must be purchased separately.
| Cat No SC6809. Price: AUD $75.00 1 |
 |
Add to trolley (available until stock is exhausted) |
In stock:  yes (14 available). Estimated dispatch time: 1-3 days | | Related to: Project: K-Type Thermostat (November 2023 [print issue] [online issue]) |
Other items relevant to this project: |
Kit parts list
Connectors | 1 × PCB-mount DC barrel socket, 2.1mm ID |
| 2 × PCB pin connector (1mm diameter) |
| 1 × K-type thermocouple socket |
| 1 × 20-pin male right-angle header (2.54mm pitch) |
| 1 × 20-pin DIL dual wipe IC socket (DIP-20) |
| 1 × 3-way mini horizontal terminal block, 5.08mm pitch (green, small, slotted) |
Semiconductors
Through-hole Capacitors | 2 × 100µF 16V electrolytic |
| 2 × 1µF 50V X7R radial ceramic (5mm pitch) |
| 6 × 100nF 50V X7R (5mm pitch) |
Through-hole Resistors | 4 × 10kΩ ±1% ¼W |
| 2 × 2.2kΩ ±1% ¼W |
| 2 × 1.1kΩ ±1% ¼W |
| 1 × 1kΩ ±1% ¼W |
| 1 × 100Ω ±1% 1W |
| 1 × 68Ω ±1% ½W |
Cable & Hardware | 1 × 10cm length of light-duty blue hookup wire |
| 2 × Ferrite sleeve/bead 15mm long, 7.6mm OD, 2.25mm ID (Fair-rite 2643300101) |
| 1 × 35cm length of 0.8mm diameter enamelled copper wire |
|
|
