Kits / Part Sets - Silicon Chip Shop

Silicon Chip Shop - Kits / Part Sets (search for shop items within this category)

Pico Gamer kit with dark grey case, no battery

A kit that includes the Pico Gamer PCB, LCD touchscreen, pre-programmed RP2040+ module, 3D-printed case and almost all the other bits you need.

The 3D-printed case is made using black resin (very dark grey in reality). You can use it as-is; it shouldn't need painting, and should be somewhat more robust than the LEDO6060 resin (more tolerant to high temperatures etc). You could still paint it if you want to.

The only thing you need to add is a LiPo battery (cell). The photo shows the case with the assembled PCB.

Cat No SC6913. Price: AUD $140.00 ¹

Add to trolley (available until stock is exhausted)

In stock:

yes (3 available). Estimated dispatch time: 1-3 days

Related to: Project: Pico Gamer (April 2024 [print issue] [online issue])

Other items relevant to this project:

Pico Gamer PCB [08104241] ($10.00) Add to trolley
3.2-inch TFT Touchscreen LCD module with SD card socket ($30.00) Add to trolley
Pico Gamer kit without case or battery ($85.00) Add to trolley
Pico Gamer kit with white case, no battery ($125.00) Add to trolley
Firmware for the Pico Gamer (Free) Add to trolley
Pico Gamer PCB pattern (PDF download) [08104241] (Free) Add to trolley

Kit parts list

	1 × SPST momentary white tactile pushbutton switch
	4 × SPST momentary red tactile pushbutton switch
	1 × SPST momentary grey tactile pushbutton switch
	1 × SPST momentary black tactile pushbutton switch
	1 × DPDT vertical slide switch with two mounting tabs
	2 × 4-pin tactile switch, black 6×6x13mm (10mm actuator)
	1 × 16mm 10kΩ logarithmic single gang potentiometer (18t spline shaft)
	1 × Pico Gamer PCB [08104241]
	1 × 3.2-inch TFT Touchscreen LCD module with SD card socket
	1 × Waveshare RP2040 Plus
	1 × Dark grey/black resin pico gamer case

Connectors

1 × 4-pin male header (2.54mm pitch)

Semiconductors

1 × SSM2211SZ 1.5W Class-AB mono amplifier IC (SOIC-8)

Through-hole Capacitors

5 × 100nF 50V X7R (5mm pitch)

Through-hole Resistors

	1 × 27kΩ ±1% ¼W
	1 × 18kΩ ±1% ¼W
	2 × 330Ω ±1% ¼W

Cable & Hardware

	4 × 15-16mm metal panhead M3 screw
	4 × 6mm metal panhead M2 screw
	1 × Double-sided foam-core tape pad, 39 × 61 × 1.5mm
	1 × DB Unlimited SW280408-1 Square Flat Mini Speaker
	1 × 2-pin 1.25mm PicoBlade plug cable (100mm long)

Subscribers receive a discount on this item. Move the pointer over the price for details.
If you are subscriber, log in to apply your discounts. Otherwise, you may subscribe at the same time as you purchase this item to get the discount.
This discount is not cumulative with any other discounts, including volume discounts.