• ESR Test Tweezers four PCB set ($10.00) Add to trolley
• Advanced/ESR Test Tweezers back panel PCB (blue) [04105242] ($2.50) Add to trolley
• PIC24FJ256GA702-I/SS programmed for the ESR Test Tweezers (0410524A.HEX) ($15.00) Add to trolley
• 0.96in white OLED with SSD1306 controller ($10.00) Add to trolley
• Firmware for the ESR Test Tweezers [0410524A.HEX] (Free) Add to trolley
• ESR Test Tweezers PCB patterns (PDF download) [04105241-2] (Free) Add to trolley

Kit parts list

	3 × 2-pin 6×3mm tactile switch, black actuator
	1 × ESR Test Tweezers back panel PCB [04105242] (white)
	1 × ESR Test Tweezers main PCB [04105241] (white)
	2 × SMD Test Tweezers arm PCB [04106212] (white)
	1 × 0.96in white OLED with SSD1306 controller

Connectors

	1 × CR2032 coin cell holder
	1 × 3-pin gold-plated male header (2.54mm pitch)

Semiconductors

	1 × PIC24FJ256GA702-I/SS programmed for the ESR Test Tweezers (0410524A.HEX)
	1 × BC817-40 50V 0.8A NPN transistor (SOT-23)
	1 × BC859C 100mA 30V low-noise PNP transistor (SOT-23)
	2 × 1N4007WS 1000V 1A standard diode (SOD-323)
	1 × BAT54S 25V 200mA schottky dual series diode (SOT-23)

SMD Capacitors

	2 × 22µF 10V M2012/0805 X5R
	2 × 10µF 16V M2012/0805 X5R
	4 × 100nF 50V M2012/0805 X7R

SMD Resistors

	1 × 1MΩ ±1% M2012/0805 ⅛W
	1 × 470kΩ ±1% M2012/0805 ⅛W
	1 × 30kΩ ±1% M2012/0805 ⅛W
	2 × 10kΩ ±1% M2012/0805 ⅛W
	2 × 3kΩ ±1% M2012/0805 ⅛W
	1 × 2.2kΩ ±1% M2012/0805 ⅛W
	2 × 1kΩ ±1% M2012/0805 ⅛W
	1 × 300Ω ±1% M2012/0805 ⅛W
	2 × 100Ω ±1% M2012/0805 ⅛W
	1 × 10Ω ±1% M2012/0805 ⅛W

Cable & Hardware

	1 × 6mm Nylon panhead M2 screw
	2 × Nylon M2 hex nut
	1 × 200mm length of clear, 10mm diameter heatshrink tubing
	1 × Double-sided foam-core tape pad, 20 × 20 × 1.5mm