 |
VGA PicoMite short-form kit with case
A set of parts to build the VGA PicoMite witn a case. The Raspberry Pi Pico is supplied pre-programmed. Headers and sockets are supplied to make the Pico pluggable, as well as screws to fix the PCB to the case.
You will need to add a power supply, keyboard, monitor and optionally an SD card (or micro SD card with full-size adaptor).
For the I/O header, two types are supplied: the standard vertical type and a right-angle boxed type, to make them accessible from outside the case. You can install either.
Note: photo shows assembled kit with green PCB (blue supplied).
| Cat No SC7402. Price: AUD $55.00 1 |
 |
Add to trolley |
In stock:  yes (7 available). Estimated dispatch time: 3-10 days | | Related to: Project: VGA PicoMite (July 2022 [print issue] [online issue]) |
Other items relevant to this project: |
Kit parts list | 1 × Altronics H0376 case |
| 1 × 4-pin tactile switch, black 6×6mm (1mm actuator) |
| 1 × VGA PicoMite PCB [07107221] |
| 1 × 200Ω top-adjust multi-turn trimpot |
| 1 × Raspberry Pi Pico |
Connectors | 1 × 2×20-pin right-angle box header |
| 1 × SD card socket (Hirose DM1AA-SF-PEJ) |
| 1 × 40-pin male header (2.54mm pitch) |
| 2 × 20-pin female socket (2.54mm pitch) |
| 1 × 15-pin HD D-sub socket (black) (VGA) |
| 1 × 6-pin mini DIN socket, right-angle |
| 1 × 2×20-pin header (2.54mm pitch) |
Semiconductors | 2 × 2N7000 60V 200mA N-channel Mosfet (TO-92) |
| 2 × 1N4148 75V 200mA diode (DO-35) |
Through-hole Capacitors | 1 × 100nF 50V X7R (5mm pitch) |
Through-hole Resistors | 4 × 10kΩ ±1% ¼W |
| 7 × 220Ω ±1% ¼W |
Cable & Hardware | 4 × M3 × 5mm nickel-plated panhead self-tapping screw |
| 4 × 6mm Nylon M3 spacer |
| 4 × 5mm blackened metal panhead M3 screw |
|
|
