Silicon Chip Shop - Components     (search for shop items within this category)

Elecrow 1A/500mA Li-ion/LiPo charger board with USB power pass-through A 46 x 32mm module with a micro-USB type B input port and a full-size USB type A output port, plus connections for a solar panel and Li-ion/LiPo cell. For more details, see the article in the August 2017 issue titled "El Cheapo Modules: Li-ion & LiPo Chargers" (starting on page 44). PLEASE NOTE: the red/black colour coding on the cables supplied MAY NOT match the polarity of the connectors on this module. Incorporates an onboard step-up circuit to provide a regulated 5V output (at up to 500mA) from the cell, plus a 1A charger and automatic input-to-output pass-through. Supplied with three 2-wire JST 2.0 cables to connect the cell and output and optionally, a solar panel for charging. Also incorporates battery level indicator LEDs. Note that the input and output USB socket data lines are not connected. Cat No SC4308. Price: AUD $25.00 1  Add to trolley (available until stock is exhausted) In stock: no. Estimated dispatch time: approximately 1 week Related to: Project: An Arduino Data Logger with GPS (August 2017 [print issue] [online issue]) Project: El Cheapo Modules: Li-ion & LiPo Chargers (August 2017 [print issue] [online issue]) Project: Arduino Data Logger Part 2 (September 2017 [print issue] [online issue]) Project: Touchscreen Altimeter and Weather station (December 2017 [print issue] [online issue]) Project: A Water Tank Level Meter with WiFi and More! (February 2018 [print issue] [online issue]) Other items relevant to these projects: Arduino Data Logger: Arduino Data Logger shield PCB with stackable headers [21107171] ($5.00) Add to trolley Arduino Data Logger shield PCB [21107171] ($2.50) Add to trolley VK2828U7G5LF TTL GPS/GLONASS/GALILEO module with antenna and cable ($25.00) Add to trolley GY-68 Barometric Pressure/Altitude/Temperature I²C Sensor breakout board ($2.50) Add to trolley Elecrow 1A Li-ion/LiPo charger board with USB pass-through ($35.00) Add to trolley DS3231-based Real Time Clock & Calendar module with mounting hardware ($6.00) Add to trolley Firmware (Arduino sketch) file for the Arduino Data Logger (Free) Add to trolley Arduino Data Logger shield PCB pattern (PDF download) [21107171] (Free) Add to trolley A Water Tank Level Meter with WiFi and More!: WiFi Water Tank Level Meter shield PCB with stackable headers [21110171] ($7.50) Add to trolley Small 2A boost step-up regulator module (MT3608) ($3.00) Add to trolley IPP80P03P4L-07 high-current P-channel Mosfet ($2.50) Add 1 to trolley IPP80P03P4L-04 high-current P-channel Mosfet ($5.00) Add to trolley DHT22/AM2302 Compatible Temperature and Humidity sensor module ($9.00) Add to trolley 5dBi 2.4GHz WiFi antenna with U.FL/IPX adaptor cable ($12.50) Add to trolley 2dBi omnidirectional 2.4GHz WiFi antenna with U.FL/IPX adaptor cable ($10.00) Add to trolley Arduino sketch (.ino) file and libraries for the WiFi Water Tank Level Meter (Free) Add to trolley WiFi Water Tank Level Meter shield PCB pattern (PDF download) [21110171] (Free) Add to trolley Touchscreen Altimeter and Weather station: PIC32MX170F256B-50I/SP programmed for the Touchscreen Altimeter/Weather Station ($15.00) Add to trolley Micromite LCD BackPack V2 complete kit ($70.00) Add to trolley (with default options) Firmware (HEX) and BASIC source code for the Touchscreen Altimeter/Weather Station (Free) Add to trolley Altimeter/Weather Station front panel artwork (PDF download) (Free) Add to trolley El Cheapo Modules: Li-ion & LiPo Chargers: TP4056 1A Li-ion/LiPo charger with mini USB socket ($2.50) Add to trolley TP4056 1A Li-ion/LiPo charger with micro USB socket ($2.50) Add to trolley