|
STM32G030K6T6 programmed for the VSD Mk2 [1111124A]
A 32-bit STM32 microcontroller in a TQFP-32 package programmed for the Mk2 Variable Speed Drive for Induction Motors.
|
|
PIC16F18146-I/SO programmed for the Flexidice [0810724A.HEX]
A PIC16F18146-I/SO 8-bit wide SOIC microcontroller programmed with the firmware for the Flexidice (0810724A.HEX).
|
|
PIC16F15214-I/P programmed for the 3D Printer Filament Dryer [2811024A.HEX]
An 8-bit PIC microcontroller in 8-pin DIP programmed for the 3D Printer Filament Drying Chamber controller (2811024A.HEX).
|
|
PIC16F1459-I/P programmed for the 8Ch Learning IR Remote (1510824A.HEX)
A PIC16F1459-I/P 8-bit DIP microcontroller programmed with the firmware for the 8-channel Learning Infrared Remote Control.
|
|
PIC32MX170F256B-50I/SO and PIC16F1455-I/SL programmed for the Micromite Explore 28 or Explore 40
A pair of micros programmed for the Micromite Explore-28 or Explore-40.
The PIC32 is programmed with the current MMBasic interpreter, while the PIC16 is programmed as the Microbridge. Both are SMD types (SOIC).
|
|
PIC16F18146-I/SO programmed for the Compact OLED Clock & Timer [1910123A.HEX]
A PIC16F18146-I/SO 8-bit wide SOIC microcontroller programmed with the main firmware for the Compact OLED Clock/Timer (1910123A.HEX).
|
|
PIC16F1459-I/P programmed for the Repurposed Mains Power-Up Sequencer (1010823M.HEX)
A PIC16F1459-I/P 8-bit DIP microcontroller programmed with the repurposed firmware for the Mains Power-Up Sequencer (1010823M.HEX). This is the new version of the firmware from the July 2024 issue, not the original one.
Note that this microcontroller is also available as part of the hard-to-get parts set for that project.
|
|
PIC24FJ256GA702-I/SS programmed for the ESR Test Tweezers (0410524A.HEX)
PIC24FJ256GA702-I/SS 16-bit SMD microcontroller programmed with the firmware for the ESR Test Tweezers (0410524A.HEX).
|
|
PIC16F1455-I/SL programmed for the Type-C USB Serial Adaptor [2410624A.HEX]
A PIC16F1455-I/SL 8-bit SMD microcontroller programmed with the firmware for the Type-C USB Serial Adaptor (2410624A.HEX).
|
|
ATmega32U4 programmed with the firmware for the Nunchuck RGB LED Driver [1610324A.HEX]
An ATmega32U4-AU 8-bit SMD microcontroller in a 44-pin TQFP package programmed with the firmware for the Wii Nunchuk RGB Light Driver (1610324A.HEX).
|
|
PIC16F1459-I/P programmed for the Mains Power-Up Sequencer (1010823A.HEX)
A PIC16F1459-I/P 8-bit DIP microcontroller programmed with the receiver firmware for the Mains Power-Up Sequencer (1010823A.HEX). This is the original version of the firmware, not the different one from the July 2024 issue.
Note that this microcontroller is also available as part of the hard-to-get parts set for that project.
|
|
PIC16F1455-I/P programmed for the Model Railway Points Sequencer transmitter (0910124A.HEX)
A PIC16F1455-I/P 8-bit DIP microcontroller programmed with the transmitter firmware for the Model Railway Points Sequencer (0910124A).
|
|
PIC16F1455-I/P programmed for the Model Railway Points Sequencer receiver (0910124B.HEX)
A PIC16F1455-I/P 8-bit DIP microcontroller programmed with the receiver firmware for the Model Railway Points Sequencer (0910124B).
|
|
PIC16F18146-I/SO programmed for the Multi-Channel Volume Control [0111122B.HEX]
A PIC16F18146-I/SO 8-bit wide SOIC microcontroller programmed with the main firmware for the Multi Channel Volume Control (0111122B.HEX).
Note that this microcontroller is also available as part of the Control Module kit for that project.
|
|
PIC16F15224-I/SL programmed for the Multi-Channel Volume Control [0111122C.HEX]
A PIC16F15224-I/SL 8-bit SOIC microcontroller programmed with the OLED module firmware for the Multi Channel Volume Control (0111122C.HEX).
Note that this microcontroller is also available as part of the OLED Module kit for that project.
|
|
PIC16F1459-I/P programmed for the Secure Remote Switch receiver (1010923R.HEX)
A PIC16F1459-I/P 8-bit DIP microcontroller programmed with the receiver firmware for the Secure Remote Switch (1010923R.HEX).
Note that this microcontroller is also available as part of the receiver short-form kit for that project.
|
|
PIC16LF15323-I/SL programmed for the Secure Remote Switch transmitter (1010923A.HEX)
A PIC16LF15323-I/SL 8-bit SOIC microcontroller programmed with the transmitter firmware for the Secure Remote Switch (1010923A.HEX).
Note that this microcontroller is also available as part of one of the transmitter kits for that project.
|
|
PIC16F18146-I/SO programmed for the Coin Cell Emulator [1810123A.HEX]
An 8-bit PIC microcontroller in 20-pin wide SOIC package, programmed for the Coin Cell Emulator (1810123A.HEX).
Note that this microcontroller is also available as part of the kit for that project.
|
|
PIC16F1459-I/P programmed for the Thermocouple Thermometer/Thermostat (0410823A.HEX)
A PIC16F1459-I/P 8-bit DIP microcontroller programmed with the receiver firmware for the Thermocouple/Thermostat (0410823A.HEX).
Note that this microcontroller is also available as part of the short-form kit for that project.
|
|
PIC12F617-I/P programmed for the magnetic levitation demonstration [jumping ring.HEX]
A PIC12F617-I/P 8-bit microcontroller programmed with the firmware for the November 2023 Circuit Notebook entry titled "Magnetic levitation demonstration".
|
|
ATtiny45V-20PU programmed for the 2m VHF FM Test Signal Generator [0610723A.HEX]
An Atmel ATtiny45-20PU 8-bit microcontroller programmed with the firmware for the 2m FM Test Generator.
Note that the EEPROM is programmed with a default set of custom frequencies. You need to program it yourself if you want different custom frequencies.
|
|
PIC12F617-I/P programmed for the Model Railway Uncoupler [0910523A.HEX]
A PIC12F617-I/P 8-bit microcontroller programmed with the firmware for the Model Railway Carriage Uncoupler (0910523A.HEX).
|
|
ATmega328P programmed with the firmware for the Low-Cost RF Signal Generator [CSE22100A.HEX]
An ATmega328 8-bit microcontroller programmed with the firmware for the AD9834-based RF Signal Generator (CSE22100A.HEX).
Note that this microcontroller is also available as part of the short-form kit for that project.
|
|
PIC16F18877-E/PT programmed for the Wideband Fuel Mixture Display (WFMD) [0510423A.HEX]
An 8-bit PIC microcontroller in 44-pin TQFP programmed for the WFMD (0510423A.HEX).
Note that this microcontroller is also available as part of the WFMD kit.
We supply the extended temperature grade chip (-E/P rather than -I/P) as this makes it more robust if installed in a hot area.
|
|
PIC16F1455-I/P programmed for the GPS-Disciplined Oscillator (0410323A.HEX)
A PIC16F1455-I/P 8-bit DIP microcontroller programmed with the firmware for the GPSDO (0410323A.HEX).
|
|
PIC16F15214-I/SN programmed for Silicon Chirp [01810123A.hex]
An 8-bit PIC microcontroller in 8-pin SOIC (SMD) programmed for Silicon Chirp (01810123A.HEX).
Note that due to the way programming works and how sound selection works, it's possible that the chip will start up in Frog or Canary mode rather than the default (Cricket). See the instructions in the article for how to change it back to Cricket if that happens.
|
|
PIC16F15214-I/SN programmed for the Digital Potentiometer [0110123A.HEX]
An 8-bit PIC microcontroller in 8-pin SOIC (SMD) programmed for the Digital Volume Control Potentiometer (0110123A.HEX).
This can be used with either the SMD or the through-hole version of the PCB.
|
|
PIC16F15214-I/P programmed for the Digital Potentiometer [0110123A.HEX]
An 8-bit PIC microcontroller in 8-pin DIP (through-hole) programmed for the Digital Volume Control Potentiometer (0110123A.HEX).
This can only be used with the through-hole version of the PCB.
|
|
PIC12F675-I/P programmed for the Model Railway Turntable (0910323A.HEX)
A PIC12F675-I/P 8-bit microcontroller programmed with the firmware for the Model Railway Turntable (0910323A.HEX).
|
|
PIC12F617-I/P programmed for the Active Mains Soft Starter [1011022A.HEX]
A PIC12F617-I/P 8-bit microcontroller programmed with the firmware for the Active Soft Starter (1011022A.HEX).
|
|
PIC24FJ256GA702-I/SS programmed for the Advanced SMD Test Tweezers (0410622A.HEX)
PIC24FJ256GA702-I/SS 16-bit SMD microcontroller programmed with the firmware for the Advanced Test Tweezers (0410622A.HEX).
|
|
W27C020-70 EEPROM programmed for the Static Noughts & Crosses Computer [0811122A.bin]
An 256KB EEPROM in 32-pin DIP programmed for the Noughts & Crosses Playing Computer (0811122A.BIN).
|
|
PIC16F18877-I/PT programmed for the Breadboard PSU Display Adaptor [0411222A.HEX]
An 8-bit PIC microcontroller in 44-pin TQFP programmed for the Breadboard Power Supply Display Adaptor (0411222B.HEX).
Note that this microcontroller is also available as part of the Breadboard PSU Display Adaptor kit.
|
|
PIC16F18146-I/SO programmed for the Digital Boost Regulator [2411022A.HEX]
An 8-bit PIC microcontroller in 20-pin wide SOIC package, programmed for the Digital Boost Regulator (2411022A.HEX).
Note that this microcontroller is also available as part of the kit for that project.
|
|
PIC12F1572-I/SN (or equivalent) programmed for the Tiny LED Christmas Ornaments
An 8-bit PIC microcontroller in 8-pin SOIC (SMD) programmed for the Tiny LED Christmas Ornaments. Also available as part of a complete kit (Cat SC5579).
Choose which of the projects you want this micro programmed for. If you need multiple types, add them to your trolley one at a time.
Note that we might supply you with a similar PIC16F15213 or PIC16F15214 chip, from the latest generation, depending on what is available at the time. We program them with equivalent firmware so that they do exactly the same job.
|
|
PIC16F1459-I/SO programmed for the Buck/Boost Battery Charger Adaptor (1410822A.HEX)
A PIC16F1459-I/SO 8-bit SMD microcontroller programmed with the firmware for the Buck-Boost Charge Adaptor (1410822A.HEX).
|
|
PIC16F1455-I/P programmed for the Automatic Train Controller (0910922A.HEX)
A PIC16F1455-I/P 8-bit DIP microcontroller programmed with the firmware for the Automatic Train Controller (0910922A.HEX).
|
|
PIC12F675-I/P programmed for the Chuff Sound module (0910922C.HEX)
A PIC12F675-I/P 8-bit microcontroller programmed with the firmware for the Chuff Sound module (0910922C.HEX).
|
|
PIC16LF1455-I/P programmed for the New GPS-Synchronised Analog Clock (1910922A.HEX)
A PIC16LF1455-I/P 8-bit DIP microcontroller programmed with the firmware for the New GPS Analog Clock (1910922A.HEX).
Updated 11/01/2023: chips sold from now on will use the revised (v1.2) firmware which provides more pulse duty cycle options for sweep clock movements.
|
|
PIC24FJ256GA702-I/SS programmed for the Wide Range Ohmmeter (0110922A.HEX)
PIC24FJ256GA702-I/SS 16-bit SMD microcontroller programmed with the firmware for the Wide Range Ohmmeter (0110922A.HEX).
|
|
PIC16F1459-I/P programmed for the Secure Remote Mains Switch receiver (1010921R.HEX)
A PIC16F1459-I/P 8-bit DIP microcontroller programmed with the receiver firmware for the Secure Remote Mains Switch (1010921R.HEX).
|
|
PIC16LF15323-I/SL programmed for the Secure Remote Mains Switch transmitter (1010921A.HEX)
A PIC16LF15323-I/SL 8-bit microcontroller (SOIC-14) programmed with the transmitter firmware for the Secure Remote Mains Switch (1010921A.HEX).
Up to 16 transmitters can be paired with one receiver.
|
|
PIC16F1459-I/SO programmed for the Multimeter Calibrator/Checker (0410722B.HEX)
A PIC16F1459-I/SO 8-bit SMD microcontroller programmed with the firmware for the Multimeter Checker/Calibrator (0410722B.HEX).
The revised B version of the software makes some slight changes so that terminal emulators like PuTTY don't give an error message when trying to connect to the virtual USB port.
|
|
ATmega328P programmed with the firmware for the 110dB RF Attenuator [CSE211003.HEX]
An ATmega328 8-bit microcontroller programmed with the firmware for the 110dB RF Attenuator for Signal Generators (CSE211003.HEX).
|
|
PIC16F88-I/P programmed for the Universal Battery Charge Controller [1410719A.HEX]
A PIC16F88-I/P 8-bit microcontroller programmed with the firmware for the Universal Battery Charge Controller (1410719A.HEX).
The same PIC is used in the revised version published in June 2022.
|
|
ATMEGA644PA-AN programmed for the AM/FM DDS Signal Generator [CSE21100A.HEX]
An ATMEGA644PA-AN 8-bit, 20MHz processor in a 44-pin TQFP package, programmed with the software for the AM/FM DDS Signal Generator.
|
|
PIC16F88-I/P programmed for the Model Railway Semaphore Signal [0910322A.HEX]
A PIC16F88-I/P 8-bit microcontroller programmed with the firmware for the Semaphore Signal for OO Gauge Model Railways (0910322A.HEX).
|
|
PIC16F15214-I/SN programmed for the Improved SMD Test Tweezers [0410621B.HEX]
An 8-bit PIC microcontroller in 8-pin SOIC (SMD) programmed for the Updated SMD Test Tweezers (0410621B.HEX).
|
|
PIC32MZ2048EFH064-250I/PT programmed for the Intelligent Dual Hybrid Power Supply [0110619A.HEX]
A PIC32MZ2048EFH064-250I/PT 32-bit, 250MHz processor in a 64-pin TQFP package, programmed with the software for the Dual Hybrid Power Supply.
|
|
PIC16F1459-I/P programmed for the Cooling Fan Controller & Loudspeaker Protector [0110222A.HEX]
A PIC16F1459-I/P 8-bit microcontroller programmed with the firmware for the Fan Controller & Loudspeaker Protector (0110222A.HEX).
|
|
PIC12F617-I/P programmed for the Remote Control Range Extender (UHF to IR part) [1510921A.HEX]
A PIC12F617-I/P 8-bit microcontroller programmed with the UHF-to-IR firmware for the Remote Control Range Extender (1510921A.HEX).
|
|
PIC10LF322-I/OT programmed for the Remote Control Range Extender (UHF transmitter part) [1510921M.HEX]
A PIC10LF322-I/OT 8-bit SMD microcontroller (SOT-23-6) programmed with the UHF transmitter firmware for the Remote Control Range Extender (1510921M.HEX).
|
|
PIC16F1705-I/P programmed for the Digital Lighting Controller Translator [1611020F.HEX]
A PIC16F1705-I/P 8-bit microcontroller programmed with the firmware for the Digital Lighting Controller Translator (1611020F.HEX).
|
|
PIC16F18877-I/P programmed for the USB Cable Tester [0410821C.HEX]
An 8-bit, PIC microcontroller in 40-pin DIP programmed for the USB Cable Tester (0410821C.HEX).
Note that this microcontroller is also available as part of the USB Cable Tester kit.
|
|
PIC16F1705-I/P programmed for the Flexible Digital Lighting Controller [1611020A.HEX]
A PIC16F1705-I/P 8-bit microcontroller programmed with the firmware for the Flexible Digital Lighting Controller (1611020A.HEX).
|
|
PIC32MX170F256B-50I/SP programmed for the Flexible Digital Lighting Controller Micromite master [1611020B.hex]
A 32-bit PIC microcontroller in 28-pin DIP package programmed for the Digital Lighting Controller Micromite master.
Note that this does not use MMBasic; instead, the PIC32 is programmed in a HEX file compiled from C source code, which uses the BackPack hardware plus the add-on board (sold separately, Cat SC5695).
|
|
PIC16F1455-I/P programmed for the Flexible Digital Lighting Controller WS2812 Slave [16110205.HEX]
A PIC16F1455-I/P 8-bit microcontroller programmed with the firmware for the WS2812 Slave (16110205.HEX).
|
|
PIC12F617-I/SN programmed for the Model Railway Carriage Lights [0910921A.HEX]
An 8-bit PIC microcontroller in 8-pin SOIC (SMD) programmed for the Model Railway Carriage Lights (0910921A.HEX).
|
|
PIC12F1572-I/SN [0410621A.HEX] or PIC12LF1572-I/SN [0410621C.HEX] programmed for the SMD Test Tweezers
An 8-bit PIC microcontroller in 8-pin SOIC (SMD) programmed for the SMD Test Tweezers. (0410621A/C.HEX).
Note that an improved version of this chip is now available.
|
|
PIC32MX170F256B-50I/SP programmed for the Touchscreen Digital Preamp, 2.8in screen version [0110319A.hex]
A 32-bit PIC microcontroller in 28-pin DIP package programmed for the Touchscreen Digital Preamp.
This is the version to suit a 2.8in touchscreen, as used in the Micromite LCD BackPack V1 or V2.
MMBasic is pre-loaded onto the chip, along with the Preamp software.
|
|
PIC32MX170F256B-50I/SP programmed for the Touchscreen Digital Preamp, 3.5in screen version [0110319B.hex]
A 32-bit PIC microcontroller in 28-pin DIP package programmed for the Touchscreen Digital Preamp.
This is the version to suit a 3.5in touchscreen, as used in the Micromite LCD BackPack V3.
MMBasic is pre-loaded onto the chip, along with the Preamp software.
|
|
PIC12F1572-I/SN programmed for Nano TV Pong [0810521B.HEX]
An 8-bit PIC microcontroller in 8-pin SOIC (SMD) programmed for Nano Pong using an 8-pin PIC (0810521B.HEX).
|
|
PIC32MX170F256B-I/SO programmed for the Battery Manager [1110620B.hex]
A 32-bit PIC microcontroller in 28-pin SOIC SMD package programmed for the Battery Manager. This includes MMBasic, which is pre-loaded onto the chip.
This is hosted on the Battery Multi Logger PCB, available separately.
|
|
PIC16F1455-I/SL programmed for the Microbridge [2410417A.HEX]
A PIC16F1455-I/SL 8-bit SMD microcontroller programmed with the firmware for the Microbridge (2410417A.HEX), as used in the Battery Multi Logger/Manager projects and the Micromite Explore 28.
|
|
PIC16F1459-I/P programmed for the 20A DC Motor Speed Controller [1100621A.HEX]
A PIC16F1459-I/P 8-bit microcontroller programmed with the firmware for the 20A DC Motor Speed Controller (1100621A.HEX).
|
|
Pair of PIC12F617-I/P chips for the Model Railway Level Crossing [0910821A/B/C.HEX]
A pack of two PIC12F617-I/P 8-bit microcontrollers programmed with the firmware for the Model Railway Level Crossing.
Indiate whether you want the pair to suit a toggle switch (0910821A.HEX + 0910821C.HEX) or a momentary switch (0910821B.HEX + 0910821C.HEX).
|
|
ATmega328P programmed with the firmware for the SiLabs FM/AM/SW Digital Radio [CSE210301.HEX]
A ATmega328 8-bit microcontroller programmed with the firmware for the Single-Chip Silicon Labs FM/AM/SW Digital Radio Receiver (CSE210301.HEX).
|
|
PIC32MX170F256B-50I/SP programmed for the Advanced GPS Computer [0510221A.hex]
A 32-bit PIC microcontroller in 28-pin DIP package programmed for the Advanced GPS Computer.
This includes MMBasic, which is pre-loaded onto the chip.
|
|
24LC32A-I/SN EEPROM programmed for the Digital FX Unit [0110221A.HEX]
An 8-pin 24LC32A-I/SN EEPROM programmed with the effects data for the Digital FX Pedal (0110221A.HEX).
|
|
PIC12F1571-I/SN programmed for the Digital FX Unit with potentiometer [0110221B.HEX]
A PIC12F1571-I/SN 8-bit SMD microcontroller programmed with the firmware for the Digital FX Pedal (0110221B.HEX).
You only need this chip if you are building the version of the Digital FX Pedal that uses a potentiometer to select between the effects.
Note: you might receive a programmed PIC12F1572-I/SN depending on what we have in stock. It will function identically.
|
|
PIC12F617-I/P programmed for the Refined Full-Wave Motor Speed Controller [1010221A.HEX or 1010221B.HEX]
A PIC12F617-I/P 8-bit microcontroller programmed with the firmware for the Refined Full-Wave Universal Motor Speed Controller (1010221A.HEX).
If you want the alternative version, 1010221B.HEX, with the power-off motor start safety feature, please select it using the drop-down below.
|
|
ATSAML10E16A-AUT programmed for the High-Current Battery Balancer [1410221B.HEX]
A 32-bit, 32-pin Atmel ATSAML10E16A-AUT ARM processor (SMD quad flat pack) programmed with the firmware for the High-Current Four Battery Balancer.
It is programmed with v1.1 of the firmware, which is an upgrade from the earlier 1410221A.HEX:
- Communication between two Balancers now works properly and they will act as a 5-8 cell/battery balancer (within the maximum 60V limit).
- The default cell low voltage threshold has been increased from 2.5V to 2.7V
- Serial commands must now be terminated with newline ('\n'), not carriage return ('\r').
|
|
PIC32MX170F256B-I/SO programmed for the Battery Multi Logger [1110620A.hex]
A 32-bit PIC microcontroller in 28-pin SOIC SMD package programmed for the Battery Multi Logger. This includes MMBasic, which is pre-loaded onto the chip.
Note that a second chip (PIC16F1455) is required to complete the project.
|
|
PIC16F1459-I/P programmed for the Electronic Wind Chimes [2301120A.HEX]
A PIC16F1459-I/P 8-bit microcontroller programmed with the firmware for the Electronic Wind Chimes (2301120A.HEX).
|
|
PIC12F617-I/P programmed for the MiniHeart [0110920A.HEX]
A PIC12F617-I/P 8-bit microcontroller programmed with the firmware for the MIniHeart Heartbeat Simulator (0110920A.HEX).
|
|
ATmega328P-AUR or ATmega88PB-AUR programmed for the RGB Stackable LED Star [1620920A.HEX or 1620920B.HEX]
An ATmega328P 8-bit SMD microcontroller programmed with the firmware to produce LED patterns for the RGB LED Star (1620920A.HEX).
Note that since ATmega328Ps are very hard to get, you might receive an ATmega88PB instead. It is programmed with a slightly different HEX file (1620920B.HEX) that does the same job on this processor.
|
|
PIC16F1459-I/P programmed for the High Power Ultrasonic Cleaner [0410520A.HEX]
A PIC16F1459-I/P 8-bit microcontroller programmed with the firmware for the High Power Ultrasonic Cleaner (0410520A.HEX).
|
|
ATtiny85V-10PU programmed for the Shirt Pocket Audio Oscillator [0111020A.HEX]
An Atmel ATtiny85V-10PU 8-bit microcontroller programmed with the firmware for the Shirt-Pocket Crystal-locked Audio DDS Oscillator.
|
|
PIC18LF14K22-I/P programmed for the Heelometer [0410811H.HEX]
A PIC18LF14K22-I/P microcontroller programmed for the Heelometer, as described in Circuit Notebook, August 2020.
|
|
PIC32MX170F256B-50I/SP programmed for the Micromite-based Touch-screen Boat Computer [BoatComputerFullV7.hex]
A 32-bit PIC microcontroller in 28-pin DIP programmed for the GPS Boat Computer. This includes the Micromite software as well as the TFT LCD configuration, with the Boat Computer BASIC program pre-loaded.
Version 7 improvements: Added altitude readout as described in Circuit Notebook, August 2020.
Version 6 improvements: Changed the 'speed' variable to a float to improve Km/h accuracy.
Version 5 improvements: Fixed a small issue related to drawing the blue border which only affects Micromites running MMBasic V5.2. Note that BoatComputerFullV5.hex uses MMBasic V5.1.
Version 4 improvements: Fixed an issue that prevented selecting the SET button for some POIs.
Version 3 improvements: Fixed a bug which could cause the software to repeatedly crash and restart when creating a POI at lat/lon 0,0.
Version 2 improvements: You can now have over fifty Points of Interest. The heading indicator and POI direction indicator are now suppressed when the boat is stationary. Improved the rendering of the heading needle. Removed the slash from the numeric zero character in one of the fonts. See changelog in ZIP file for more details.
|
|
PIC16F1455-I/SL programmed for the Ol' Timer II [1910420A.HEX]
A PIC16F1455-I/SL 8-bit SMD microcontroller programmed with the firmware for the Ol' Timer II (1910420A.HEX).
|
|
PIC16F1459-I/P programmed for the Infrared Remote Control Assistant [1500520A.HEX]
A PIC16F1459-I/P 8-bit microcontroller programmed with the firmware for the IR Remote Control Assistant (1500520A.HEX). Can be used with either PCB version.
|
|
PIC32MX170F256B-50I/SP programmed for the Touchscreen RCL Box
A 32-bit PIC microcontroller in 28-pin DIP package programmed for the Touchscreen RCL Box. This includes the Micromite software as well as the 3.5in TFT LCD configuration, with the RCL Box BASIC program pre-loaded.
|
|
PIC32MX170F256B-50I/SP programmed for the Car Altimeter
A 32-bit PIC microcontroller in 28-pin DIP package programmed for the Touchscreen Vehicle Altimeter. This includes the Micromite software as well as the TFT LCD configuration, with the Altimeter BASIC program pre-loaded.
|
|
PIC32MZ2048EFH064-I/PT programmed for the DIY Reflow Oven Controller [2910420A.HEX]
A PIC32MZ2048EFH064-I/PT 32-bit, 200MHz processor in a 64-pin TQFP package, programmed with the software for the DIY Solder Reflow Oven Controller.
|
|
PIC32MX170F256B-50I/SP programmed for the Indoor Air Quality Monitor [AirQuality.hex]
A 32-bit PIC microcontroller in 28-pin DIP package programmed for the Air Quality Monitor. This includes the Micromite software as well as the TFT LCD configuration, with the Air Quality Monitor BASIC program pre-loaded.
|
|
PIC32MZ2048EFH064-250I/PT programmed for the Low-distortion DDS Signal Generator
A PIC32MZ2048EFH064-250I/PT 32-bit, 250MHz processor in a 64-pin TQFP package, programmed with the software for the Low-distortion DDS Signal Generator.
|
|
dsPIC33FJ64MC802-E/SP programmed for the 1.5kW Induction Motor Speed Controller [1010512B.HEX]
A dsPIC33FJ64MC802 16-bit digital signal controller with motor control peripheral, programmed with the firmware for the 1.5kW Induction Motor Speed Controller (1010512B.HEX).
This is the updated version which fixes a couple of bugs, lowers the over-temperature threshold and adds a shortened boost mode (activated by placing a jumper over pins 3 & 4 of the ICSP socket). See the article in the August 2013 issue for more details.
|
|
PIC12F1572-I/SN (or equivalent) programmed for the Tiny LED Xmas Tree [1611119A.HEX]
An 8-bit PIC microcontroller in 8-pin SOIC (SMD) programmed for the Tiny LED Xmas Tree. Also available as part of a complete kit (Cat SC5180).
Note that we might supply you with a similar PIC16F15213 or PIC16F15214 chip, from the latest generation, depending on what is available at the time. We program them with equivalent firmware so that they do exactly the same job.
|
|
PIC16F1459-I/P programmed for the Digital Panel Meter/USB Display [18111182A.HEX]
A PIC16F1459-I/P 8-bit microcontroller programmed with the firmware for the Five-way Panel Meter/USB Display (18111182A.HEX).
|
|
PIC32MX170F256D-50I/PT programmed for the 4DoF Simulation Seat [1110919A.HEX]
A 32-bit PIC microcontroller in 44-pin TQFP programmed for the Gamer's Seat with Four DoF. This includes the BASIC source code needed for the project.
|
|
PIC16F88-I/P programmed for the standalone Six Input Audio Selector [0111019A.HEX]
A PIC16F88-I/P 8-bit microcontroller programmed with the firmware for the Six Input Audio Switcher project, when used as a standalone device (0111019A.HEX).
|
|
PIC10F202-E/OT programmed for the Ultrabrite LED Bicycle Light [1610919A.HEX]
A PIC10F202 SMD microcontroller programmed with the firmware for the Ultrabright LED Pushbike Light (1610919A.HEX).
Also comes with a free TC6502P095VCT temperature switch IC, as used in the same project (as TS1).
|
|
PIC16F88-I/P programmed for the Low-Noise Stereo Preamp with Six Input Selector [0111111M.HEX]
A PIC16F88-I/P 8-bit microcontroller programmed with the firmware for the Low-Noise Stereo Preamplifier (March-April 2019), when combined with the Six Input Audio Switcher project from the Six-way Stereo Audio Input Selector (September 2019) (0111111M.HEX).
|
|
PIC12F617-I/P programmed for the Radio Head Unit Dimmer Adaptor [0510619A.HEX]
A PIC12F617-I/P 8-bit microcontroller programmed with the firmware for the Car Radio Dimmer Adaptor (0510619A.HEX).
|
|
PIC16F1455-I/P programmed for the Microbridge [2410417A.HEX]
A PIC16F1455-I/P 8-bit microcontroller programmed with the firmware for the Microbridge (2410417A.HEX).
|
|
PIC32MX170F256B-50I/SP programmed for the Micromite Mk2 plus capacitor
A 32-bit PIC microcontroller in 28-pin DIP programmed as the Micromite Mk2. Also includes a through-hole Tantalum capacitor to use for its internal regulator - with sufficient capacitance and voltage rating for the job, adn batch tested to have suitably low ESR.
Chips are now programmed with the revised v5.05.03 software (or higher). Note that the capacitor supplied may be a Kemet Solid Molded Tantalum type, in which case the positive lead is indicated by the rounded edge on the case and a dot marking on the top.
|
|
ATmega328P programmed with the firmware for the RF Signal Generator [0410619A.HEX] (V14)
An ATmega328 8-bit microcontroller programmed with the firmware for the AM/FM/CW Scanning HF/VHF RF Signal Generator (0410619A.HEX).
Update: this new version (V14) suits both pulse-type and level-type rotary encoders. You can identify a pulse type encoder as the two internal switches are always open when the encoder is at rest, while a level-type encoder will have one or both switches closed in some rotational positions. If your encoder is a level-type, solder a 100kΩ resistor from pin 28 of IC1 to GND to enable correct operation.
|
|
PIC32MZ2048EFH064-250I/PT programmed for the DSP Active Crossover/Equaliser (V8)
A PIC32MZ2048EFH064-250I/PT 32-bit, 250MHz processor in a 64-pin TQFP package, programmed with the software for the DSP Active Crossover.
It's programmed with version 8 of the software, dated 08/06/2019.
This version fixes a small bug in v7 regarding loading the configuration from a blank EEPROM.
|
|
PIC12F617-I/P programmed for the Steering Wheel Controller to IR project [1510519A.HEX]
A PIC12F617-I/P 8-bit microcontroller programmed with the firmware for the Steering Wheel Controls (SWC) Infrared Adaptor (1510519A.HEX).
|
|
PIC16F1455-I/P programmed for the GPS "Finesaver Plus" Speedo/Clock/Volume Control [0110419A.HEX]
A PIC16F1455-I/P 8-bit microcontroller programmed with the firmware for the GPS Speedometer/Clock/Volume Control (0110419A.HEX).
|
|
PIC16F88-I/P programmed for the 433MHz Wireless Data Range Extender [1500419A.HEX]
A PIC16F88-I/P 8-bit microcontroller programmed with the firmware for the Solar-powered Data Repeater for 433MHz Remotes (1500419A.HEX).
|
|
PIC16F88-I/P programmed for the Low-Noise Stereo Preamp [0111111B.HEX] (previously 0111111A.HEX)
A PIC16F88-I/P 8-bit microcontroller programmed with the firmware for the Low-Noise Stereo Preamplifier (0111111B.HEX).
This updated B version of the firmware solves the problem that the remote control section won't work without the input selector board plugged in.
|
|
PIC12F617-I/P programmed for the Touch and IR Remote Control Trailing Edge Dimmer [1011119B.HEX]
A PIC12F617-I/P 8-bit microcontroller programmed with the firmware for the Versatile Trailing Edge Dimmer with Touch and/or Infrared Remote Control project (1011119B.HEX).
This revised version suits the currently sold version of the remote control, which has white dotted circles around each button.
If you have one of the older remotes without the circles, please select the "A" version instead.
|
|
PIC32MX270F256B-50I/SP programmed for the USB Mouse and Keyboard Interface for Micros [2431118A/B.HEX]
A PIC32MX270F256B-50I/SP 32-bit microcontroller programmed for the USB Mouse and Keyboard Interface for Microcontrollers.
|
|
ATtiny816-SFR programmed for the ATtiny816 Development/Breakout Board [2411018A.HEX]
A 20-pin ATtiny816-SFR 8-bit SMD microcontroller programmed with the demonstration software for the ATtiny816 Breakout and Development Board with Capacitive Touch (2411018A.HEX).
You can also re-program it with your own code using a PICkit 4, as described in the January 2018 article.
|
|
Pair of programmed micros for the Useless Box [0811118A/B.HEX]
A pack of two programmed PICs, as required for the Useless Box project from December 2018.
The pack includes one PIC16F88-I/P programmed with 0811118A.hex and one PIC12F675-I/P programmed with 0811118B.hex.
|
|
PIC16F1459-I/SO programmed for the Four-channel High-current DC Fan & Pump Controller (0510818A.HEX)
A PIC16F1459-I/SO 8-bit SMD microcontroller programmed with the firmware for the Four-channel DC Fan/Pump Controller (0510818A.HEX).
|
|
PIC16F1455-I/P programmed for the USB Digital and SPI Interface Module [1610718A.HEX]
A PIC16F1455-I/P 8-bit microcontroller programmed with the firmware for the Digital Interface Module, as used to drive the Expandable LED Christmas Tree (1610718A.HEX).
|
|
PIC32MX170F256B-50I/SP programmed for the GPS-Synched Frequency Reference [0410718A.hex]
A 32-bit PIC microcontroller in 28-pin DIP package programmed for the GPS-Synched Frequency Reference. This includes the Micromite software v5.04 as well as the TFT LCD configuration, with the Frequency Reference BASIC program pre-loaded.
|
|
PIC12F617-I/P programmed for the White Noise Generator [0910618A.HEX]
A PIC12F617-I/P 8-bit microcontroller programmed with the firmware for the White Noise Source, as used in the Steam Train Whistle/Diesel Horn project (0910618A.HEX).
This PIC is also suitable for the Tinnitus/Insomnia Killer project from the November 2018 issue.
This is a single PIC. If you want the Steam Train Whistle/Diesel Horn PIC as well, please order the pair of PICs instead.
|
|
PIC12F617-I/P programmed for the Steam Train Whistle/Diesel Horn [0910618M.HEX]
A PIC12F617-I/P 8-bit microcontroller programmed with the firmware for the Steam Train Whistle/Diesel Horn (0910618M.HEX).
This is a single PIC. If you want the White Noise Generator PIC as well, please order the pair of PICs instead.
|
|
Pair of PIC12F617-I/P chips for the Steam Train Whistle/Diesel Horn [0910618A/M.HEX]
A pack of two PIC12F617-I/P 8-bit microcontrollers programmed with the firmware for the Steam Train Whistle/Diesel Horn (0910618A.HEX and 0910618M.HEX).
This includes the chip to produce white noise for the steam sound, plus the chip that produces the whistle/horn sounds.
You don't need to purchase the two chips separately if you buy this bundle.
Also make sure to order the TDA7052AT audio amplifier IC if you need one for this project.
|
|
PIC32MM0256GPM028-I/SS programmed for the Super Digital Sound Effects Module [0110718A.hex]
A 32-bit PIC microcontroller in 28-pin SSOP (SMD) package programmed for the Super Digital Sound Effects Module.
|
|
PIC12F617-I/P programmed for the Watchdog Door Alarm [0310718A.HEX]
A PIC12F617-I/P 8-bit microcontroller programmed with the firmware for the Personal Door Alarm (0310718A.HEX).
|
|
PIC32MX170F256B-50I/SP programmed for the Tariff Super Clock [SuperTariffClock.hex]
A 32-bit PIC microcontroller in 28-pin DIP package programmed for the Tariff Super Clock. This includes the Micromite software v5.04 as well as the TFT LCD configuration, with the Tariff Super Clock BASIC program pre-loaded.
|
|
PIC12F617-I/P programmed for the Recurring Event Reminder [1910718A.HEX]
A PIC12F617-I/P 8-bit microcontroller programmed with the firmware for the Recurring Event Reminder (1910718A.HEX).
|
|
PIC16F1455-I/P programmed for the USB Flexitimer [1910618A.HEX]
A PIC16F1455-I/P 8-bit microcontroller programmed with the firmware for the USB Flexitimer (1910618A.HEX).
|
|
PIC12F617-I/P programmed for the Temperature Switch Mk2 [0510518A.HEX]
A PIC12F617-I/P 8-bit microcontroller programmed with the firmware for the Temperature Switch Mk2 (0510518A.HEX).
|
|
PIC16F88-I/P programmed for the Deluxe Frequency Switch [0510418A.HEX]
A PIC16F88-I/P 8-bit microcontroller programmed with the firmware for the Multi-use Frequency Switch (0510418A.HEX).
|
|
PIC12F675-I/P programmed for the Thermopile-based Heater Controller [1010418A.hex]
An 8-bit PIC microcontroller in 8-pin DIP programmed for the Infrared Sensing Heater Controller.
|
|
PIC12F675-I/P programmed for the Triac-based Full Wave 230V Universal Motor Speed Controller [1010218B.hex]
An 8-bit PIC microcontroller in 8-pin DIP programmed for the Full-wave 230VAC Universal Motor Speed Controller.
The original software (1010218A.HEX) contained a bug which prevented feedback from working after the soft-start period. That is fixed in this new version, 1010218B.HEX (04/11/2019).
|
|
PIC12F675-E/P programmed for the High Power DC Fan Speed Controller [0511117A.HEX]
A PIC12F675-E/P 8-bit microcontroller programmed for the Proportional High Power DC Fan Speed Controller.
|
|
PIC32MX170F256B-50I/SP programmed for the Touchscreen Altimeter/Weather Station
A 32-bit PIC microcontroller in 28-pin DIP programmed for the Touchscreen Altimeter/Weather Station. This includes the Micromite software as well as the TFT LCD configuration, with the Altimeter BASIC program pre-loaded.
|
|
PIC12F675-I/P programmed for Kelvin the Cricket [0810917B.HEX]
A PIC12F675-I/P 8-bit microcontroller programmed with the firmware for Kelvin, the Very Clever Cricket.
This revised version fixes a bug which prevented modes 13-16 from working properly.
|
|
PIC32MX170F256B-50I/SP programmed for the Deluxe Touchscreen eFuse [1810617A.HEX]
A 32-bit PIC microcontroller in 28-pin DIP programmed for the Deluxe Touchscreen eFuse. This includes the Micromite software v5.03 as well as the TFT LCD configuration, with the eFuse BASIC program pre-loaded.
Please note: the BUK7909-75AIE SenseFETs are no longer manufactured so check you can get those (or equivalents) before buying any parts for this project.
|
|
PIC12F675-I/P programmed for Automatically Rebooting a Modem [RouterAutoReboot.HEX]
A PIC12F675-I/P 8-bit microcontroller programmed with the firmware for the Circuit Notebook entry titled "Automatically rebooting NBN modem" from the September 2017 issue.
|
|
PIC32MX170F256B-50I/SP programmed for the Micromite-based radio IF alignment with DDS [DDSIFAlign.HEX]
A 32-bit PIC microcontroller in 28-pin DIP programmed for the Radio IF Alignment with DDS project. This includes the Micromite software v5.03 as well as the TFT LCD configuration, with the IF Alignment BASIC program pre-loaded.
|
|
PIC16F88-I/P programmed for RapidBrake [0510517A.HEX]
A PIC16F88-I/P 8-bit microcontroller programmed with the firmware for the RapidBrake Emergency Stop Signalling project (0510517A.HEX).
|
|
PIC16F88-I/P programmed for the New Marine Ultrasonic Anti-Fouling Unit [0410417A.HEX]
A PIC16F88-I/P 8-bit microcontroller programmed with the firmware for the New Marine Ultrasonic Antifouling project (0410417A.HEX).
|
|
PIC32MX170F256B-50I/SP programmed for the Micromite-based DDS Signal Generator [SigGeneratorFull.HEX]
A 32-bit PIC microcontroller in 28-pin DIP programmed for the Micromite-based DDS Signal Generator. This includes the Micromite software v5.2 as well as the TFT LCD configuration, with the Signal Generator BASIC program pre-loaded.
|
|
PIC16F88-I/P programmed for the All-new Swimming Pool Lap Counter [1910217A.HEX]
A PIC16F88-I/P 8-bit microcontroller programmed with the firmware for the Bright LED Pool Lap Counter (1910217A.HEX).
|
|
PIC16LF88-I/P programmed for the GPS-Synchronised Analog Clock for movements with stepping hands [04120217A.HEX]
A PIC16LF88-I/P 8-bit Microcontroller programmed for the GPS-Synchronised Analog Clock (04120217A.HEX).
This chip is programmed with the v2.6 firmware, to suit clock movements with a stepping second hand.
This project is now obsolete. It has been replaced with the new version from September 2022 - see https://siliconchip.au/Shop/?article=15466
|
|
PIC16LF88-I/P programmed for the GPS-Synchronised Analog Clock for movements with sweep hands [04130217A.HEX]
A PIC16LF88-I/P 8-bit Microcontroller programmed for the GPS-Synchronised Analog Clock (04130217A.HEX).
This chip is programmed with the v1.4 firmware, to suit clock movements with a sweep second hand.
This project is now obsolete. It has been replaced with the new version from September 2022 - see https://siliconchip.au/Shop/?article=15466
|
|
PIC16F88-I/P programmed for the High Power DC Motor Speed Controller [1111216A.HEX]
A PIC16F88-I/P 8-bit microcontroller programmed with the firmware for the project entitled "Our biggest-ever DC speed controller: 12 to 60V at up to 40A" (1111216A.HEX).
|
|
PIC16F88-E/P programmed for the Automotive Sensor Modifier [0511116A.HEX]
A PIC16F88-E/P 8-bit microcontroller programmed with the firmware for the Automotive Sensor Modifier (Voltage Interceptor) (0511116A.HEX).
|
|
PIC32MX170F256B-50I/SP programmed for the Micromite-based Touchscreen Voltage/Current Reference v1.00 [0411016A.HEX]
A 32-bit PIC microcontroller in 28-pin DIP programmed for the Touchscreen-controlled Voltage/Current Reference v1.00. This includes the Micromite software v5.2 as well as the TFT LCD configuration, with the Reference BASIC program pre-loaded.
|
|
PIC12F675-I/P programmed for the 50A Battery Charger Controller [1111116A.HEX]
A PIC12F675-I/P 8-bit microcontroller programmed with the firmware for the 50A Battery Charger Controller (1111116A.HEX).
|
|
PIC32MX470F512H-120/PT programmed for the Micromite Plus
A PIC32MX470F512H-120/PT 32-bit, 120MHz processor in a 64-pin TQFP package, programmed with the Micromite Plus firmware (to suit the Explore 64 and Plus BackPack). Firmware version 5.05.03 (or higher).
|
|
PIC12F675-I/P programmed for the Mosquito Lure [2511016A.HEX]
A PIC12F675-I/P 8-bit microcontroller programmed with the firmware for the Male Mosquito Lure (2511016A.HEX).
The same program is used regardless of which version you are building.
|
|
PIC12F675-I/P programmed for the Micropower LED Flasher [1610916A.HEX]
A PIC12F675-I/P 8-bit microcontroller programmed with the firmware for the Micropower LED Flasher (1610916A.HEX).
The same program is used regardless of which version you are building.
|
|
PIC32MX470F512L-120/PF programmed for the Micromite Plus
A PIC32MX470F512L-120/PF 32-bit, 120MHz processor in a 100-pin TQFP package, programmed with the Micromite Plus firmware (to suit the Explore 100). Firmware version 5.05.03 (or higher).
|
|
PIC32MX170F256B-50I/SP programmed for the Micromite-based Touchscreen Energy Meter v1.01 [0411606A.hex]
A 32-bit PIC microcontroller in 28-pin DIP programmed for the Touchscreen-controlled Energy Meter v1.01. This includes the Micromite software v5.2 as well as the TFT LCD configuration, with the Energy Meter BASIC program pre-loaded.
This revised version (v1.01) works around a production error on the RevG PCB, fixes the out-of-memory error when attempting to change the Real Time Clock time/date and also improves various other minor features.
|
|
PIC16F88-I/P programmed for the Currawong Remote Volume Control [0111114A.HEX]
A PIC16F88-I/P 8-bit microcontroller programmed with the firmware for the remote control module in the Currawong 2 x 10W Stereo Valve Amplifier (0111114A.HEX).
|
|
PIC12F675-I/P programmed for the Cyclic Timer / Mains Period Timer [1010816A.HEX]
A PIC12F675-I/P 8-bit microcontroller programmed with the firmware for the two 230VAC Mains Timers (1010816A.HEX).
The same program is used regardless of which version of the timer you are building.
|
|
PIC16F88-I/P programmed for the Compact 8-Digit Frequency Meter [0410516B.HEX]
A PIC16F88-I/P 8-bit microcontroller programmed with the firmware for the Compact 8-Digit Auto-Ranging Frequency Meter (0410516B.HEX).
This revised (RevB) version fixes a problem initialising some LCDs.
|
|
PIC32MX170F256B-50I/SP programmed for the Micromite-based Touchscreen Super Clock [SuperClockFull.hex]
A 32-bit PIC microcontroller in 28-pin DIP programmed for the Touchscreen Super Clock. This includes the Micromite software v5.1 as well as the TFT LCD configuration, with the Super Clock BASIC program pre-loaded.
|
|
PIC32MX150F128D-I/PT programmed for the Stereo LED Audio Level Meter / VU Meter [0110416A.HEX]
A 32-bit PIC microcontroller in 44-pin TQFP programmed for the 100dB Stereo LED Audio Level/VU Meter.
Note: you may receive a PIC32MX170F256D-I/PT, depending on what we have in stock. Either chip will do the job.
|
|
PIC12F675-I/P programmed for the Hotel Safe Alarm [0310616A.HEX]
A PIC12F675-I/P 8-bit microcontroller programmed with the firmware for the Hotel Safe Alarm for Travelers (0310616A.HEX).
|
|
PIC16F88-I/P programmed for the 230/115VAC, 50/60Hz Precision Turntable Motor Driver [0410416A.HEX]
A PIC16F88-I/P 8-bit microcontroller programmed with the firmware for the Precision Turntable Driver (0410416A.HEX).
|
|
PIC12F675-I/P programmed for the Fridge/Freezer Alarm [0310216A.HEX]
A PIC12F675-I/P 8-bit microcontroller programmed with the firmware for the Fridge Door Alarm (0310216A.HEX).
|
|
PIC32MX170F256B-50I/SP programmed for the Micromite-based Ultrasonic Garage Parking Assistant [ParkingAssistFull.hex]
A 32-bit PIC microcontroller in 28-pin DIP programmed for the Micromite Parking Assistant. This includes the Micromite software v5.1 as well as the TFT LCD configuration, with the Parking Assistant BASIC program pre-loaded.
|
|
PIC16LF1709-I/SO programmed for the Battery Pack Cell Balancer [1111115A.HEX]
A PIC16LF1709-I/SO 8-bit microcontroller programmed with the firmware for the Battery Pack Cell Balancer (1111115A.hex).
|
|
PIC16F88-E/P programmed for the Solar MPPT Charger & Lighting Controller [1610116A.HEX]
A PIC16F88-E/P 8-bit microcontroller programmed with the firmware for the MPPT Solar Charger and Lighting Controller (1610116A.HEX).
|
|
PIC32MX170F256B-I/SP programmed for the High Visibility 6-Digit LED GPS Clock [1911015D.HEX]
A 32-bit PIC microcontroller in 28-pin DIP programmed for the GPS-Enabled 6-Digit LED Clock.
Firmware version B (1.1) fixes a bug in the 12 hour mode.
Firmware version C (1.2) also fixes a bug in the minutes roll-over for time zones with an offset not in whole hours.
Firmware version D (1.3) fixes a regression and also adds a remote control button code to switch between local time and UTC/GMT (default: Teletext).
|
|
PIC12F675-I/P programmed for the White LED Turntable Strobe [0410116A.HEX]
A PIC12F675-I/P 8-bit microcontroller programmed with the firmware for the White LED Strobe for Turntables (0410116A.HEX).
|
|
PIC16F88-I/P programmed for the Speech Timer [1911115A.HEX]
A PIC16F88-I/P 8-bit microcontroller programmed with the firmware for the Speech Timer for Contests and Debates (1911115A.HEX).
|
|
PIC16F88-I/P programmed for the Fingerprint Scanner [0310915A.HEX]
A PIC16F88-I/P 8-bit microcontroller programmed with the firmware for the Fingerprint Access Controller (0310915A.HEX).
|
|
PIC16F88-I/P programmed for the 9-Channel Infrared Remote Control [1510815B.HEX]
A PIC16F88-I/P 8-bit microcontroller programmed with the revised firmware for the 9-Channel Infrared Remote Control Receiver (1510815B.HEX).
|
|
PIC16F88-I/P programmed for the Driveway Monitor detector/transmitter [1510515C.HEX]
A PIC16F88-I/P 8-bit microcontroller programmed with the firmware for the Driveway Sentry detector/transmitter unit (1510515C.HEX).
The revised firmware for the detector/transmitter unit adds the option for faster sampling if required - see the part two article in the August 2015 issue for more details. (The original version was 15105151A.HEX).
|
|
PIC12F675-I/P programmed for the Driveway Monitor receiver [1510515B.HEX]
A PIC12F675-I/P 8-bit microcontroller programmed for the Driveway Monitor receiver unit.
|
|
PIC32MX170F256B-I/SP programmed for the Bad Vibes Infrasonic Snooper [0420415A.HEX]
A 32-bit PIC microcontroller in 28-pin DIP programmed for the Bad Vibes Infrasonic Snooper.
|
|
PIC32MX170F256B-I/SP programmed for the Low Frequency Distortion Analyser [0410415B.HEX]
A 32-bit PIC microcontroller in 28-pin DIP programmed for the Low-Frequency Distortion Analyser.
Revision B fixes a bug in the original which caused it to sample data from the wrong pin (pin 5 rather than pin 2).
|
|
PIC32MX170F256B-I/SP programmed for the Nixie Clock Mk2 [1910215G.HEX]
A 32-bit PIC microcontroller in 28-pin DIP programmed for the Nixie Clock Mk2.
This is the new revised version which fixes the following bugs:
1) not going into sleep mode reliably (revB).
2) daylight savings calculation bug (revC)
3) roll-over to midnight showing 24:00:00 and in some cases, first minute of each hour not being displayed correctly (revD)
4) fixes slow GPS time acquisition (revE)
5) updated time zone data to latest as of end 2015 (revF)
6) fixed minutes roll-over for time zones not on hour boundaries (revG)
|
|
PIC32MX170F256D-50I/PT programmed for the Micromite Mk2 (44-pin)
A 32-bit PIC microcontroller in 44-pin TQFP programmed as the Micromite Mk2. Note that this is the SMD version.
|
|
PIC16F88-I/P programmed for the Programmable Mains Timer With Remote Switching [1911214B.HEX]
A PIC16F88-I/P 8-bit microcontroller programmed with the firmware for the Programmable Mains Timer (1911214B.HEX).
The revised firmware fixes a bug which occurred under a specific set of circumstances.
|
|
PIC12F675-E/P programmed for the Courtesy LED Light Delay for Cars [0510914A.HEX/1510914A.HEX]
A PIC12F675-E/P 8-bit microcontroller programmed for the Car LED Courtesy Light Delay.
|
|
PIC32MX470F512H-I/PT programmed for the Digital Effects Processor [0120914A.HEX]
The PIC32MX470F512H-I/PT 32-bit microcontroller programmed for the Digital Effects Processor for Guitars and Musical Instruments (0120914A.HEX).
|
|
PIC32MX270F256B-I/SP programmed for the ASCII Video Terminal [2410714A.HEX]
A PIC32MX270F256B-I/SP 32-bit microcontroller programmed for the ASCII Video Terminal project (2410714B.HEX), which accompanies the Micromite.
Chips are now supplied programmed with firmware v1.3. Note: the PIC32MX270 is compatible with the PIC32MX250 specified in the article.
|
|
PIC32MX695F512H-80I/PT programmed for the Touchscreen Digital Audio Recorder
PIC32MX695F512H-80I/PT programmed with the Touch-screen Audio Recorder software. Performs an equivalent function to the PIC32MX795F512H-80I/PT in this role.
|
|
PIC16F877A-I/P programmed for the 2.5GHz 12-Digit Frequency Counter [0411112C.HEX]
A PIC16F877A 8-bit microcontroller programmed for the High-Resolution Frequency Counter [0411112C.HEX].
This is a revised version of the firmware which has improved accuracy when measuring low-frequency signals and improved front panel button debouncing, as per Circuit Notebook May 2015.
|
|
ATmega48-20AU programmed for the RGB LED Strip Driver/Controller [1610514B.HEX]
An Atmel ATmega48 8-bit microcontroller programmed with the firmware for the Phantasmagorical RGB LED Strip Driver (1610514B.HEX).
This is a revised version of the firmware that fixes a minor bug in the brightness control.
|
|
PIC16F88-I/P programmed for the NiMH/Nicad Burp Charger [1410314A.HEX]
A PIC16F88-I/P 8-bit microcontroller programmed with the firmware for the Nicad/NiMH Battery Burp Charger (1410314A.HEX).
|
|
PIC16F88-I/P programmed for the 230V/10A Universal Motor Speed Controller [1010214A.HEX]
A PIC16F88-I/P 8-bit microcontroller programmed with the firmware for the 10A, 230VAC Super Smooth Brush Motor Speed Controller (1010214A.HEX).
|
|
PIC32MX470F512H-I/PT programmed for the Stereo Echo & Reverb Unit / Dual-Channel Audio Delay [0111013B.HEX]
The PIC32MX470F512H-I/PT 32-bit microcontroller programmed for the Digital Echo & Reverberation Unit (0111013B.HEX).
This can also be used to build the Dual Channel Audio Delay, which originally used 0111013A.HEX, since the function (echo/reverb or delay) is set with a jumper.
|
|
PIC16LF88-I/P programmed for the Bellbird [0811213A.HEX]
PIC16LF88-I/P 8-bit Microcontroller programmed for the Electronic Bellbird (0811213A.HEX).
|
|
PIC32MX270F256B-I/SP programmed for the GPS Tracker [0511213A.HEX]
A PIC32MX270F256B-I/SP 32-bit microcontroller programmed for the GPS Tracker/Logger project (0511213A.HEX).
Firmware v1.2 is supplied. Note: the PIC32MX270 is compatible with the PIC32MX250 specified in the article.
|
|
PIC16F88-E/P programmed for the Automatic Car Headlight Controller [0311113A.HEX]
A PIC16F88-E/P 8-bit microcontroller programmed for the Automatic Car Headlight Controller (0311113A.HEX).
|
|
PIC16F88-E/P programmed for the Speedo Corrector Mk3 [0510913A.HEX]
A PIC16F88-E/P 8-bit microcontroller programmed for the Speedo Corrector Mk.3 (0510913A.HEX).
|
|
Pair of PIC12F675-I/P programmed for PC Birdies [0810413A.HEX]
Two PIC12F675-I/P 8-bit microcontrollers programmed for the PC Birdies project, August 2013.
Supplied as a pair, programmed identically as required for the project.
|
|
PIC12F675-I/P programmed for the IR-to-UHF Converter [1510713A.HEX]
A PIC12F675-I/P 8-bit microcontroller programmed for the Infrared to UHF Converter (UHF Link), July 2013.
|
|
PIC12F675-I/P programmed for the UHF-to-IR Converter [1510713B.HEX]
A PIC12F675-I/P 8-bit microcontroller programmed for the UHF to Infrared Converter (UHF Link), July 2013.
|
|
PIC16F88-I/P programmed for the revised 10-Channel Remote Control Receiver [1510613B.HEX]
A PIC16F88-I/P 8-bit microcontroller programmed for the updated 10-Channel Remote Receiver (1510613B.HEX).
This version suits the updated PCB only and allows both the infrared and 433MHz UHF receivers to be fitted simultaneously.
|
|
PIC16F88-I/P programmed for the 10-Channel Remote Control Receiver [1510613A.HEX]
A PIC16F88-I/P 8-bit microcontroller programmed for the 10-Channel Remote Receiver (1510613A.HEX).
|
|
PIC12F675-I/P programmed for Do Not Disturb [1210413A.HEX]
A PIC12F675-I/P 8-bit microcontroller programmed for the Do Not Disturb/Off-Hook Timer project, May 2013.
|
|
dsPIC33FJ128GP306T-I/PT programmed for the CLASSiC DAC v1.02 [0110213B.hex]
A dsPIC33FJ128GP306T-I/PT 16-bit SMD Microcontroller programmed for the CLASSiC DAC (TQFP-64/0.5mm).
This is a fine-pitch SMD IC and care will be required when soldering. If necessary, the firmware can be updated later using the SD card bootloader.
Update v1.02 10/09/2021: this revised firmware fixes three known problems with the CLASSiC DAC:
1) The pushbutton & AC input sensing code has been rewritten to provide much better button debouncing and avoid switching off unless button is held in for a significant time.
2) The IR reception code has been changed to reject noise and prevent accidental power on/off which can occur very occasionally. It now aborts IR processing if a corrupted signal is detected and two "standby" IR messages need to be received in succession before it will power on or off.
Note also that the PCB has pads to allow low-value ceramic capacitors to be added at the output of the TOSLINK receivers. These are generally not needed, but if you find the input LEDs lighting up when there is no signal, try soldering three 30pF ceramic capacitors to those pads.
|
|
PIC16LF88-I/SO programmed for the LED Ladybird [0810313A.HEX]
An SMD microcontroller (SOIC-18) programmed to suit the LED Ladybird/Lady Beetle.
Avoids the hassle of having to wire up a temporary programming header to the PCB.
|
|
PIC16F88-E/P programmed for the High Energy Electronic Ignition System / Jacob's Ladder [0511012A.HEX]
PIC16F88-E/P 8-bit Microcontroller programmed for the High Energy Electronic Ignition System [0511012A.HEX].
Also suits the Improved Jacob's Ladder project from the Feburary 2013 issue.
|
|
PIC16LF88-I/P programmed for the Garbage/Recycling Reminder [1911112A.HEX]
A PIC16LF88-I/P 8-bit low power microcontroller programmed for the Garbage and Recycling Reminder (11911112A.HEX).
|
|
PIC18F45K80-I/PT programmed for USB Power Monitor [0410912A.HEX]
A PIC18F45K80-I/PT 8-bit microcontroller programmed with the firmware for the USB Power Monitor [0410912A.HEX].
|
|
dsPIC33FJ128GP802-I/SP programmed for the LED Musicolour [1611012A.HEX]
A dsPIC33FJ128GP802 16-bit Digital Signal Controller programmed with the firmware for the LED Musicolour [1611012A.HEX].
|
|
PIC12F675-I/P programmed for the DCC Automatic Reverse Loop Controller [0911012A.HEX]
A PIC12F675-I/P 8-bit microcontroller programmed for the DCC Automatic Reverse Loop Controller project, from October 2012.
|
|
PIC12F675-I/P programmed for the DCC Block Switch [0911012B.HEX]
A PIC12F675-I/P 8-bit microcontroller programmed for the DCC Block Switch. This is described in the Automatic Reverse Loop Controller project, from October 2012 and uses the same PCB as the Reverse Loop Controller.
|
|
PIC12F675-I/P programmed for the Barking Dog Blaster [2510812A.HEX]
A PIC12F675-I/P 8-bit microcontroller programmed for the Barking Dog Blaster project, from September 2012.
|
|
PIC18F27J53-I/SO programmed for the Digital Sound Effects Generator [0910912A]
A PIC18F27J53-I/SO 8-bit microcontroller with USB, programmed with the firmware for the Digital Sound Effects Generator [0910912A.HEX].
Packaged in anti-static plastic tape.
|
|
PIC16F1507-I/P programmed for the Wideband Oxygen Sensor Controller Mk2 [0510612A.HEX]
A PIC16F1507 8-bit microcontroller programmed with the firmware for the main Wideband Oxygen Sensor Controller Mk2 board (0510612A.HEX).
|
|
PIC16F88-E/P programmed for the Wideband Oxygen Sensor Controller Mk2 Display [0510612B.HEX]
A PIC16F88 8-bit microcontroller programmed with the firmware for the Wideband Oxygen Sensor Controller Mk2 display board (0510612B.HEX).
|
|
PIC12F675-I/P programmed for the Crazy Cricket/Freaky Frog [0810912A.HEX]
A PIC12F675-I/P 8-bit microcontroller programmed for the Crazy Cricket/Freaky Frog project, from June 2012.
|
|
PIC16F877A-I/P programmed for the SemTest semiconductor test set [0410312B.HEX]
PIC16F877A 8-bit Microcontroller programmed for the SemTest semiconductor test set (0410312B.HEX).
|
|
PIC16F88-E/P programmed for the MPPT Solar Charge Controller Rev.1 [1410211B.HEX]
A PIC16F88 8-bit microcontroller programmed with the firmware for the revised MPPT Solar Charge Controller (1410211B.HEX).
|
|
PIC16F88-I/P programmed for the 12/24V 3-Stage MPPT Solar Charge Controller [1410211A.HEX]
A PIC16F88-I/P 8-bit microcontroller programmed with the firmware for the 12/24V 3-Stage MPPT Solar Charge Controller [1410211A.HEX]
Note that this design has been superseded by the MPPT Solar Charge Controller RevA (March 2012).
|
|
ATmega48 programmed for the Crystal DAC [0120212A.HEX]
ATmega48 8-bit Microcontroller programmed for the Crystal DAC upgrade [0120212A.HEX].
This microcontroller can be installed in place of the existing ATmega48 in the DAC project, in conjunction with the Crystal DAC upgrade board.
|
|
PIC16F88-I/P programmed for the 3-Input Stereo Audio Switcher [0111211A.HEX]
A PIC16F88 8-bit microcontroller programmed with the firmware for the 3-Input Stereo Audio Switcher (0111211A.HEX).
|
|
dsPIC33FJ64GP802-I/SP programmed for the Digital Audio Delay [0121211A.HEX]
A dsPIC33FJ64GP802 16-bit Digital Signal Controller programmed with the firmware for the Digital Audio Delay (0121211A.HEX).
|
|
PIC18LF14K22-I/P programmed for the G-Force Meter [0410811C.HEX]
A PIC18LF14K22-I/P microcontroller programmed for the G-Force Meter, from November 2011.
|
|
PIC32MX695F512H-80I/PT programmed for the Maximite/miniMaximite (V2.7)
Maximite programmed and labelled PIC32 (64 pins) with vivid pin 1 dot, packaged in anti-static plastic tape.
Contains the Maximite V2.7 software. Can be upgraded to the latest version over USB once the unit has been built.
|
|
PIC16F88-I/P programmed for the Quizzical [0811011A.HEX]
A PIC16F88-I/P 8-bit microcontroller programmed with the firmware for the Quizzical (0811011A.HEX).
|
|
PIC18F14K50-I/P programmed for USB MIDI-Mate [2311011C.HEX]
A PIC18F14K50 8-bit microcontroller programmed with the firmware for the USB MIDI-Mate [2311011C.HEX].
Chips are now supplied programmed with the revised version of the software as described in the Circuit Notebook entry, December 2013.
|
|
PIC16F88-E/P programmed for the Ultrasonic Tank Level Gauge [0410911A.HEX]
PIC16F88-I/P 8-bit Microcontroller programmed for the Ultrasonic Tank Level Gauge (0410911A.HEX).
|
|
PIC16F628A-I/P programmed for the GPS Frequency Reference [GPSFrqRfv3.HEX or GPSFrqRfv4.HEX]
PIC16F628A-I/P 8-bit microcontroller programmed with the firmware for the GPS Frequency Reference.
V3 is for GPS modules that have a 4800 baud rate NMEA data stream.
V4 is for the newer V.KEL GPS modules that have a 9600 baud rate NMEA data stream.
|
|
PIC18LF14K22-I/P programmed for the Digital Spirit Level [0410811B.HEX]
A PIC18LF14K22-I/P microcontroller programmed for the Digital Spirit Level, from August 2011 [0410811B.HEX].
This is programmed with the revised version of the software.
|
|
ATtiny861 programmed for the Rudder Position Indicator Sensor/Transmitter [2010711A.HEX]
ATTiny861 8-bit Microcontroller programmed for the Rudder Position Indicator [2010711A.HEX].
This is for the transmitter; the receiver unit uses a differently programmed microcontroller.
|
|
ATtiny861 programmed for the Rudder Position Indicator Receiver/Display [2010711B.HEX]
ATTiny861 8-bit Microcontroller programmed for the Rudder Position Indicator [2010711B.HEX].
This is for the receiver/display unit; the transmitter unit uses a differently programmed microcontroller.
|
|
PIC16F88-I/P programmed for the VersaTimer/Switch [1910611A.HEX]
PIC16F88-I/P 8-bit Microcontroller programmed for the VersaTimer/Switch (1910611A.HEX).
|
|
dsPIC33FJ64GP802-I/SP programmed for the Sportsync [0110511A.HEX]
A dsPIC33FJ64GP802 16-bit Digital Signal Controller programmed with the firmware for the Sportsync: Audio Delay Module (0110511A.HEX).
You might get a dsPIC33FJ128GP802 instead. They function the same when programmed with this HEX file.
|
|
PIC16F88-I/P programmed for the Projector Speed Controller [1310411A.HEX]
PIC16F88-I/P 8-bit Microcontroller programmed for the Projector Speed Controller (1310411A.HEX).
|
|
PIC18F27J53-I/SP programmed for the Universal USB Data Logger [0411210A.HEX]
A PIC16F27J53-I/SP 8-bit microcontroller programmed for the USB Data Logger (0411210A.HEX).
|
|
dsPIC33FJ64GP802-I/SP programmed for the Digital Lighting Sequencer/Controller [1611010A.HEX]
A dsPIC33FJ64GP802 16-bit Digital Signal Controller programmed with the firmware for the Digital Lighting Sequencer/Controller [1611010A.HEX]
|
|
PIC16F88-I/P programmed for the Electrolytic Capacitor Reformer and Tester [0410810A.HEX]
PIC16F88-I/P 8-bit Microcontroller programmed for the Electrolytic Capacitor Reformer (0410810A.HEX).
|
|
ATtiny2313 programmed for the Remote-Controlled Digital Up/Down Timer [1910810B.HEX]
ATtiny2313 8-bit Microcontroller programmed for the Remote-Controlled Digital Up/Down Timer [1910810B.HEX].
This version of the firmware has some improvements and bugfixes compared to the original (1910810A.HEX).
|
|
PIC12F675-I/P programmed for the Ultrasonic Cleaner [0420810A.HEX]
A PIC12F675-I/P 8-bit microcontroller programmed for the Ultrasonic Cleaner [0420810A.HEX]
|
|
PIC18F2550-I/SP programmed for Intelligent 12V Fan Controller [1810710A.HEX]
A PIC18F2550-I/SP 8-bit microcontroller programmed with the firmware for the Intelligent 12V Fan Controller [1810710A.HEX]
|
|
PIC16F877A-I/P programmed for the 16-Bit Digital Potentiometer [0410710A.HEX]
PIC16F877A-I/P 8-bit Microcontroller programmed for the 16-Bit Digital Potentiometer [0410710A.HEX]
|
|
PIC16F88-I/P programmed for the Air Quality Monitor [0430610A.HEX]
PIC16F88-I/P 8-bit Microcontroller programmed for the Air Quality Monitor [0430610A.HEX]
|
|
PIC16F88-I/P programmed for the Digital Insulation Meter [0410610A.HEX]
PIC16F88-I/P 8-bit Microcontroller programmed for the Digital Insulation Meter (0410610A.HEX).
|
|
PIC16F88-I/P programmed for the Solar Powered Lighting Controller [1610510A.HEX]
PIC16F88-I/P 8-bit Microcontroller programmed for the Solar Powered Lighting Controller [1610510A.HEX]
|
|
dsPIC33FJ64GP802-I/SP programmed for the Digital Audio Signal Generator [0420310C.HEX]
A dsPIC33FJ64GP802 16-bit Digital Signal Controller programmed with the firmware for the Digital Audio Signal Generator [0420310C.HEX]
Note: since we don't have any dsPIC33FJ64GP802 in stock we instead supply it as a dsPIC33FJ128GP802-I/SP, the two function identically and have the same pin layout, except the one we offer has slightly more flash memory.
|
|
dsPIC33FJ64GP802-I/SP programmed for the Webserver in a Box (WIB) [0711109A.HEX]
A dsPIC33FJ64GP802 16-bit Digital Signal Controller programmed with the v5.41 firmware for the WIB (0711109A.HEX).
|
|
PIC18F1320-I/P programmed for the Internet Time Display Module [0710210A.HEX]
A PIC18F1320-I/P 8-bit microcontroller programmed with the firmware for the Internet Time Display Module [0710210A.HEX]
|
|
PIC18F4550-I/P programmed for the GPS Car Computer [0510110E.HEX]
A PIC18F4550-I/P 8-bit microcontroller programmed with the firmware for the GPS Car Computer (0510110E.HEX).
|
|
PIC16F88-I/P programmed for the Voltage Interceptor [0511209A.HEX]
PIC16F88-I/P 8-bit Microcontroller programmed for the Voltage Interceptor for Cars with ECUs [0511209A.HEX]
|
|
ATmega48 programmed for the Stereo DAC [0110909A.HEX]
ATmega48 8-bit Microcontroller programmed for the original Stereo DAC project [0110909A.HEX].
|
|
PIC16F88-I/P programmed for the Digital Capacitor Leakage Meter [0411209A.HEX]
A PIC16F88-I/P 8-bit microcontroller programmed for the Digital Capacitor Leakage Meter [0411209A.HEX]
|
|
PIC16LF88-I/P programmed for the GPS Synchronised Clock for sweep hands [0420309B.HEX]
A PIC16LF88-I/P 8-bit low power microcontroller programmed for the GPS Synchronised Clock [0420309B.HEX].
This is the version to suit clocks with sweep hands.
This project is now obsolete. It has been replaced with the new version from September 2022 - see https://siliconchip.au/Shop/?article=15466
|
|
PIC16F88-I/P programmed for the Digital Megohm and Leakage Current Meter [0411009A.HEX]
PIC18F88-I/SP programmed for the Digital Megohm Meter [0411009A.HEX].
|
|
PIC16F88-I/P programmed for the Wideband Oxygen Sensor Controller [0511009A.HEX]
PIC16F88-I/P 8-bit Microcontroller programmed for the Wideband Controller [0511009A.HEX].
Note that this has been superseded by the Mk.2 version.
|
|
PIC16F88-I/P programmed for the 3-Channel Rolling Code UHF Remote Control Transmitter [1500809A.HEX]
PIC16F88-I/P 8-bit Microcontroller programmed for the 3-Channel Rolling Code UHF Remote Control [1500809A.HEX].
This is the chip for the transmitter. A differently-programmed microcontroller is required for the receiver.
|
|
PIC16F88-I/P programmed for the 3-Channel Rolling Code UHF Remote Control Receiver [1500809B.HEX]
PIC16F88-I/P 8-bit Microcontroller programmed for the 3-Channel Rolling Code UHF Remote Control [1500809B.HEX].
This is the chip for the receiver. A differently-programmed microcontroller is required for the transmitter.
|
|
PIC16F877A-I/P programmed for the 6-Digit GPS Clock [0410509E.HEX]
PIC16F877A-I/P 8-bit Microcontroller programmed for the 6-Digit GPS Clock [0410509E.HEX].
Programmed with the latest version of the software. Supports the auto-dim add-on.
|
|
dsPIC33FJ64GP802-I/SP programmed for the SD Card Music & Speech Recorder/Player [0110809A.HEX]
A dsPIC33FJ64GP802-I/SP 16-bit Digital Signal Controller programmed with the firmware for the SD Card Music and Speech Recorder/Player [0110809A.HEX].
This is the version to suit the Altronics LCD unit.
|
|
dsPIC33FJ64GP802-I/SP programmed for the SD Card Music & Speech Recorder/Player [0110809J.HEX]
A dsPIC33FJ64GP802-I/SP 16-bit Digital Signal Controller programmed with the firmware for the SD Card Music and Speech Recorder/Player [0110809J.HEX].
This is the version to suit the Jaycar LCD unit.
|
|
PIC18F2550-I/SP programmed for the Battery Capacity Meter [0420609A.HEX]
PIC18F2550-I/SP micro-controller programmed for the Battery Capacity Meter (0420609A.HEX).
|
|
PIC18F1320-I/SO programmed for the Intelligent Dimmer [1010409A.HEX]
PIC18F1320-I/SO SOIC micro-controller programmed for the Intelligent Dimmer (1010409A.HEX).
|
|
PIC16LF88-I/P programmed for the GPS Synchronised Clock for stepping hands [0420309A.HEX]
A PIC16LF88-I/P 8-bit low power microcontroller programmed for the GPS Synchronised Clock [0420309A.HEX].
This is the version to suit clocks with stepping hands. Firmware version 2.1.
This project is now obsolete. It has been replaced with the new version from September 2022 - see https://siliconchip.au/Shop/?article=15466
|
|
PIC16F88-I/P programmed for the Digital Audio Millivoltmeter [0410309A.HEX]
A PIC16F88-I/P 8-bit microcontroller programmed for the Digital Audio Millivoltmeter [0410309A.HEX]
|
|
PIC18F4550-I/P programmed for the Multi-Purpose Car Scolling Display [0510109A.hex]
A PIC18F4550-I/P 8-bit microcontroller programmed with the firmware for the Multi-Purpose Car Scolling Display [0510109A.hex]
|
|
PIC12F675-I/P programmed for the 433 MHz UHF Remote Switch Transmitter [1510109A.HEX]
A PIC12F675-I/P 8-bit microcontroller programmed for the UHF Remote Switch Transmitter [1510109A.HEX]
|
|
PIC12F675-I/P programmed for the 433 MHz UHF Remote Switch Receiver [1510109B.HEX]
A PIC12F675-I/P 8-bit microcontroller programmed for the UHF Remote Switch Receiver [1510109B.HEX]
|
|
PIC16F88-I/P programmed for the Wideband Oxygen Sensor Display [0531108A.HEX]
PIC16F88-I/P 8-bit Microcontroller programmed for the Wideband Oxygen Sensor Display [0531108A.HEX]
|
|
PIC18F4550-I/PT programmed for the USB Clock
A PIC18F4550-I/PT 8-bit microcontroller programmed with the firmware for the USB Clock.
Comes in a 44-pin TQFP (Thin Quad Flat Pack).
|
|
PIC16F88-I/P programmed for the RF Level & Power Meter [0421008A.HEX]
PIC16F88-I/P 8-bit Microcontroller programmed for the RF Level & Power Meter [0421008A.HEX]
|
|
PIC16F628A-I/P programmed for the Special Function Timer [0511008A.HEX]
PIC16F628A 8-bit microcontroller programmed with the firmware for the Special Function Timer [0511008A.HEX]
|
|
PIC16F88-I/P programmed for the Railpower IV [0910908A.HEX]
PIC16F88-I/P 8-bit Microcontroller programmed for Railpower IV [0910908A.HEX]
|
|
PIC16F88-I/P programmed for the LED Strobe & Tachometer [0410808A.HEX]
PIC16F88-I/P 8-bit Microcontroller programmed for the LED Strobe & Tachometer [0410808A.HEX]
|
|
dsPIC30F4011-30I/P programmed for the DSP Musicolour [1010708A.HEX]
A dsPIC30F4011 16-bit Digital Signal Controller programmed with the firmware for the DSP Musicolour [1010708A.HEX].
Note that this project has been largely superseded by the LED Musicolour (October-November 2012) and there is an Altronics kit available for that project (K5804).
|
|
PIC16F877A-I/P programmed for the Musical Instrument Tuning Aid [0410708A.HEX]
PIC16F877A 8-bit Microcontroller programmed for the Musical Instrument Tuning Aid [0410708A.HEX]
|
|
PIC16F628A-I/P programmed for the Digital LC Meter [0410508A.HEX]
PIC16F628A 8-bit microcontroller programmed with the firmware for the Digital LC Meter [0410508A.HEX]
|
|
PIC16F88-I/P programmed for the 12V Battery Charge Controller [1410408A.HEX]
PIC16F88-I/P 8-bit Microcontroller programmed for the 12V Battery Charge Controller [1410408A.HEX]
|
|
PIC16F88-I/P programmed for the DC Motor Speed Controller [0910308A.HEX]
PIC16F88-I/P 8-bit Microcontroller programmed for the DC Motor Speed Controller [0910308A.HEX]
|
|
PIC16F88-I/P programmed for the UHF Remote Mains Switch Receiver [1010208A.HEX]
PIC16F88-I/P 8-bit Microcontroller programmed for the UHF Remote Mains Switch Receiver [1010208A.HEX]
|
|
PIC16F88-I/P programmed for the UHF Remote Mains Switch Transmitter [1020208A.HEX]
PIC16F88-I/P 8-bit Microcontroller programmed for the UHF Remote Mains Switch Transmitter [1020208A.HEX]
|
|
PIC16F88-I/P programmed for the Shift Indicator & Rev Limiter For Cars [0510208A.HEX]
PIC16F88-I/P 8-bit Microcontroller programmed for the Shift Indicator & Rev Limiter For Cars [0510208A.HEX]
|
|
PIC16F88-I/P programmed for the Pool Alarm
A PIC16F88-I/P 8-bit microcontroller programmed with the "Pool Alarm.HEX"
|
|
PIC16F88-I/P programmed for the Water Tank Level Meter telemetry base station
PIC16F88-I/P 8-bit micro-controller Programmed with "Water Tank Level Meter receiver.HEX"
|
|
PIC16F88-I/P programmed for the Water Tank Level Meter main/transmitter unit
PIC16F88-I/P 8-bit micro-controller Programmed with the software for the Water Tank Level Meter main sensor/transmitter unit.
|
|
ATmega8515 programmed for the CDROM Playback Adaptor
Atmel 8-bit microcontroller programmed with the firmware for the Playback Adaptor for CD-ROM Drives.
|
|
PIC16F84(A)-04/P programmed for the UV Lightbox Timer
A PIC16F84A or PIC16F84 8-bit microcontroller programmed with the firmware for the UV Light Box for Making PCBs.
|
|
PIC16F88-I/P programmed for the Rolling Code Keyless Entry System receiver unit [ircroll.HEX]
PIC16F88-I/P 8-bit micro-controller programmed with the software for the Infrared Rolling Code Receiver.
|
|
PIC16F628A-I/SO programmed for the Rolling Code Keyless Entry System transmitter unit [irxmroll.HEX]
PIC16F628A-I/SO 8-bit micro-controller in an SOIC SMD package programmed with the software for the Infrared Rolling Code Transmitter.
|
|
PIC16F84A-04(I)/P programmed for Oscar
A PIC16F84A 8-bit microcontroller programmed with the firmware for the Oscar Naughts and Crosses Game.
|
|
PIC16F628A-I/P programmed for the Bike Wheel POV Display
A PIC16F628A 8-bit microcontroller programmed with the firmware for the Spectacular Bike-Wheel POV Display.
|
|
PIC16F88-I/P programmed for the Fast NiMH/Nicad Battery Charger [NiMHCharger.hex]
PIC16F88-I/P 8-bit micro-controller programmed with the software for the Fast Charger for NiMH & Nicad Batteries.
|
|
PIC16F88-I/P programmed for the Low Noise Stereo Preamplifier with Remote Volume Control
PIC16F88-I/P 8-bit micro-controller programmed with the software for the Low Noise Stereo Preamplifier with Remote Volume Control to suit the 20W Class A Amplifier.
|
|
PIC16F88-E/P programmed for the Adaptive Turbo Timer
PIC16F88-E/P 8-bit micro-controller programmed with the software for the Adaptive Turbo Timer.
|
|
PIC16F88-E/P programmed for the Programmable Ignition System [ignprgm.hex]
PIC16F88-E/P 8-bit microcontroller programmed with the software for the Programmable Ignition System.
|
|
PIC16F88-I/P programmed for the VU/Peak Meter
PIC16F88-I/P 8-bit microcontroller programmed with the software for the VU/Peak Meter with LCD Bargraphs.
|
|
ATmega8515 programmed for the Remote Volume Control & Preamplifier Module [DAVOL.HEX]
Atmel 8-bit microcontroller programmed with the firmware for the Digital Remote Volume Control & Preamplifier.
|
|
PIC16F628A-I/P programmed for the Low-Cost 50MHz Frequency Meter, Mk.2 [freqenc2.hex]
PIC16F628A-I/P 8-bit microcontroller programmed with the firmware for the Low-Cost 50MHz Frequency Meter, Mk.2.
|
|
PIC16F88-E/P programmed for the Car Air Conditioner Controller
PIC16F88-E/P 8-bit microcontroller programmed with the software for the Intelligent Car Air-Conditioner Controller.
|
|
PIC16F88-I/P programmed for the Cordless Power Tool Charge Controller [CHRGCONT.ASM]
PIC16F88-I/P 8-bit Microcontroller programmed for the Cordless Power Tool Charge Controller.
|
|
PIC16F628A-I/P programmed for the Heartbeat CPR Training Beeper [CPRTRAIN.HEX]
PIC16F628A-I/P 8-bit microcontroller programmed with the firmware for the Heartbeat CPR Training Beeper.
|
|
PIC16F628A-I/P programmed for the Super Speedo Corrector [speedcor.hex]
PIC16F628A-I/P 8-bit microcontroller programmed with the firmware for the Super Speedo Corrector.
|
|
PIC16F88-I/P programmed for the LED Tachometer [ledtacho.hex]
PIC16F88-I/P 8-bit Microcontroller programmed for the LED Tachometer with Dual Displays.
|
|
PIC16F84A-20(I)/P programmed for the Pocket A/V Test Pattern Generator
A PIC16F84A 8-bit microcontroller programmed with the firmware for the Pocket AV Test Pattern Generator.
|
|
PIC16F88-I/P programmed for the Universal High-Energy LED Lighting System [Luxeon.hex]
PIC16F88-I/P 8-bit Microcontroller programmed for the Universal High-Energy LED Lighting System.
|
|
PIC16F877A-I/P programmed for the PC-Controlled Burglar Alarm [PCCBA.HEX]
A PIC16F877A 8-bit microcontroller programmed for the PC-Controlled Burglar Alarm System main unit [PCCBA.HEX].
|
|
PIC16F84A-04(I)/P programmed for the PC-Controlled Burglar Alarm keypad [keypad.hex]
A PIC16F84A 8-bit microcontroller programmed with the firmware for the PC-Controlled Burglar Alarm System keypad unit.
|
|
PIC16F88-I/P programmed for the MIDI Drum Kit [drumkit16.hex]
PIC16F88-I/P 8-bit Microcontroller programmed for the MIDI Drum Kit.
|
|
(2005 Version) PIC16F88-E/P programmed for the Universal High Energy Electronic Ignition System [ignition.hex]
PIC16F88-E/P 8-bit Microcontroller programmed for the Universal High Energy Electronic Ignition System.
Note that this design has been largely superseded by the updated version published in the November and December 2012 issues.
|
|
PIC16F877A-I/P programmed for the Serial I/O Controller [IO.HEX]
PIC16F877A 8-bit microcontroller programmed with the firmware for the Serial I/O Controller and Analog Sampler.
|
|
PIC16F84A-04(I)/P programmed for the Programmable Flexitimer [PICTIME2.HEX]
PIC16F84A 8-bit Microcontroller programmed for the Programmable Flexitimer.
|
|
PIC16F88-I/P programmed for the Carbon Monoxide Alert [cosensor.hex]
PIC16F88-I/P 8-bit Microcontroller programmed for the Carbon Monoxide Alarm.
|
|
PIC16F628A-I/P programmed for the Remote-Controlled Automatic Table Lamp Dimmer [autolamp.hex]
PIC16F628A-I/P 8-bit microcontroller programmed with the firmware for the Remote Controlled Dimmer.
|
|
PIC16F84A-04(I)/P programmed for the USB Electrocardiograph [ECGSAMPL.HEX]
PIC16F84A 8-bit Microcontroller programmed for the USB-Controlled Electrocardiograph.
|
|
PIC16F628A-I/P programmed for the V8 Doorbell [engine3.hex]
PIC16F628A 8-bit Microcontroller programmed for the V8 Doorbell.
|
|
PIC16F628A-I/P programmed for the Digital Fuel Adjuster [voltmod.hex]
A PIC16F628A 8-bit microcontroller programmed for the Digital Fuel Adjuster project.
|
|
PIC16F84A-20(I)/P programmed for the Speedo Corrector [corector.hex]
A PIC16F84A 8-bit microcontroller programmed for the Speedo Corrector project.
Please note: this project is now obsolete; see the Speedo Corrector Mk3 article in the September 2013 issue instead.
|
|
Pair of PIC16F628A-I/P programmed for the Electronic Boost Controller [pwmcntrl.hex & pwmadjrl.hex]
Two PIC16F628A-I/P 8-bit microcontrollers programmed for the Independent Electronic Boost Controller.
Supplied as a pair. One is programmed with pwmcntrl.hex and one with pwmadjrl.hex as required for the project.
|
|
PIC16F84A-20/(I)P programmed for the Intelligent Turbo Timer [turbotmr.hex]
A PIC16F84A 8-bit microcontroller programmed for the Intelligent Turbo Timer project.
Note: this project is now obsolete, see the Adaptive Turbo Timer project from the August 2007 issue.
|
|
PIC16F84A-20(I)/P programmed for the Duty Cycle Meter [dutycycl.hex]
A PIC16F84A 8-bit microcontroller programmed with the firmware for the Duty Cycle Meter (dutycycl.hex).
|
|
PIC16F84(A)-04/P programmed for the Versatile Auto Timer [oneshott.hex]
A PIC16F84A or PIC16F84 8-bit microcontroller programmed with the firmware for the Versatile Auto Timer (oneshott.hex).
|
|
Pair of PIC16F628A-I/P programmed for the Digital Pulse Adjuster [pwmmod.hex & pwmadjst.hex]
Two PIC16F628A-I/P 8-bit microcontrollers programmed for the Digital Pulse Adjuster project.
Supplied as a pair. One is programmed with pwmmod.hex and one with pwmadjst.hex as required for the project.
|
|
PIC16F628A-I/P programmed for the Deep-cycle 12V Battery Charger [battchrg.hex]
PIC16F628A 8-bit Microcontroller programmed for the 12V Deep-cycle Battery Charger.
|
|
PIC16F84(A)-04/P programmed for the Fuel Mixture Display [AIRFUEL.HEX]
A PIC16F84A or PIC16F84 8-bit microcontroller programmed with the firmware for the Fuel Mixture Display for Cars.
|
|
ATmega8515 programmed for the SMS Controller
Atmel 8-bit microcontroller programmed with the latest firmware for the SMS Controller (v1.2).
|
|
PIC16F628A-I/P programmed for the Appliance Energy Meter [wattmetr.hex]
PIC16F628A 8-bit Microcontroller programmed for the Versatile Appliance Energy Meter.
|
|
PIC16F628A-I/P programmed for the "Master of Time" PIC-based Programmable Timer [MOT.HEX]
PIC16F628A-I/P 8-bit microcontroller programmed with the firmware for the "Master of Time" PIC-based Programmable Timer.
|
|
PIC16F84(A)-04/P programmed for the Low-Cost 50MHz Frequency Meter [FREQENCY.HEX]
A PIC16F84A or PIC16F84 8-bit microcontroller programmed with the firmware for the Low-Cost 50MHz Frequency Counter.
|
|
PIC16F84A-20(I)/P programmed for the Digital Instrument Display for Cars [INSTRUM.HEX]
A PIC16F84A 8-bit microcontroller programmed with the firmware for the Digital Instrument Display for Cars.
|
|
PIC16F628A-I/P programmed for the 10MHz DDS Generator [DDSFRQ20.HEX]
PIC16F628A-I/P 8-bit microcontroller programmed with the firmware for the 10MHz Direct Digital Synthesis Generator.
|
|
PIC16F84(A)-04/P programmed for the Keypad Alarm [KEYPAD.HEX]
A PIC16F84A or PIC16F84 8-bit microcontroller programmed with the firmware for the Highly-Flexible Keypad Alarm.
|
|
PIC16F84(A)-04/P programmed for the Alarm Dialler [ALARM.HEX]
A PIC16F84A or PIC16F84 8-bit microcontroller programmed with the firmware for the Telephone Dialler for Burglar Alarms.
|
|
PIC16F84(A)-04/P programmed for the Tiptronic-Style Gear Indicator [GEAR.HEX]
A PIC16F84A or PIC16F84 8-bit microcontroller programmed with the firmware for the Tiptronic-Style Gear Indicator.
|
|
PIC16F84(A)-04/P programmed for the Direct Conversion Receiver
A PIC16F84A or PIC16F84 8-bit microcontroller programmed with the firmware for the Direct Conversion Receiver for Radio Amateurs.
|
|
PIC16F84(A)-04/P programmed for the Remote Volume Control [MOTORPOT.HEX]
A PIC16F84A or PIC16F84 8-bit microcontroller programmed with the firmware for the Remote Volume Control for Stereo Amplifiers.
|
|
PIC16F84(A)-04/P programmed for the Compact 80A Automotive Ammeter [AMMETER.HEX]
A PIC16F84A or PIC16F84 8-bit microcontroller programmed with the firmware for the 80A Compact Ammeter.
|
|
PIC16F84(A)-04/P programmed for the PIC-Controlled 32-LED Knightrider [KNIGHT.HEX]
A PIC16F84A or PIC16F84 8-bit microcontroller programmed with the firmware for the PIC-based 32-LED Knightrider display.
|
|
PIC16F84A-20(I)/P programmed for the Automatic Single-Channel Light Dimmer [AUTODIM.HEX]
A PIC16F84A 8-bit microcontroller programmed with the firmware for the Automatic Single-Channel Light Dimmer.
|
|
PIC16F84(A)-04/P programmed for the 6-Channel IR Remote Volume Control [REMVOL.HEX]
A PIC16F84A or PIC16F84 8-bit microcontroller programmed with the firmware for the 6-Channel IR Remote Volume Control.
|
|
PIC16F84(A)-04/P programmed for the 10-Channel IR Remote Control Receiver [10-RMOTE.HEX]
A PIC16F84A or PIC16F84 8-bit microcontroller programmed with the firmware for the 10-Channel IR Remote Control Receiver.
|
|
PIC16F84A-20(I)/P programmed for the Touch and/or Remote-Controlled Light Dimmer [DIMMER.HEX]
A PIC16F84A 8-bit microcontroller programmed with the firmware for the Touch and/or Remote-Controlled Light Dimmer.
|
|
PIC16F84(A)-04/P programmed for the Automotive Thermometer [TEMP.HEX]
A PIC16F84A or PIC16F84 8-bit microcontroller programmed with the firmware for the Automotive Thermometer.
|
|
PIC16F84(A)-04/P programmed for the HeartMate Heart Rate Monitor [HEART.HEX]
A PIC16F84A or PIC16F84 8-bit microcontroller programmed with the firmware for the HeartMate Heart Rate Monitor.
|
|
PIC16F84(A)-04/P programmed for the Pic-Toc Simple Digital Alarm Clock [alexcloc.hex]
A PIC16F84A or PIC16F84 8-bit microcontroller programmed with the firmware for the Pic-Toc Simple Digital Alarm Clock.
|
|
PIC16F84(A)-04/P programmed for the Phonome [DIALUP.HEX]
A PIC16F84A or PIC16F84 8-bit microcontroller programmed with the firmware for the Phonome.
|
|
PIC16F84(A)-04/P programmed for the Big-Digit 12/24-Hour Clock [CLOCK1.HEX]
A PIC16F84A or PIC16F84 8-bit microcontroller programmed with the firmware for the Big-Digit 12/24-Hour Clock.
|
|
PIC16F84(A)-04/P programmed for the Morse Clock [MORSECLK.HEX]
A PIC16F84A or PIC16F84 8-bit microcontroller programmed with the firmware for the Morse Clock.
|
|
PIC16F84(A)-04/P programmed for the Automatic Rain Gauge [RAINA.HEX]
A PIC16F84A or PIC16F84 8-bit microcontroller programmed with the firmware for the Automatic Rain Gauge with Digital Readout.
|
|
PIC16F84(A)-04/P programmed for the LED Dice [Dice.HEX]
A PIC16F84A or PIC16F84 8-bit microcontroller programmed with the firmware for the LED Dice.
|
|
PIC16F84(A)-04/P programmed for the Digital Tachometer [TACHO.HEX]
A PIC16F84A or PIC16F84 8-bit microcontroller programmed with the firmware for the Digital Tachometer For Your Car.
|
|
PIC16F84(A)-04/P programmed for the Automotive Digital Voltmeter [DVM.HEX]
A PIC16F84A or PIC16F84 8-bit microcontroller programmed with the firmware for the Digital Voltmeter For Your Car.
|
|
PIC16F84(A)-04/P programmed for the Speed Alarm for Cars [SPEED254.HEX]
A PIC16F84A or PIC16F84 8-bit microcontroller programmed with the firmware for the Speed Alarm For Cars.
|
|
PIC16F84(A)-04/P programmed for the Programmable Ignition Timing Module [IGN3Nb1.HEX]
A PIC16F84A or PIC16F84 8-bit microcontroller programmed with the firmware for the Programmable Ignition Timing Module For Cars.
|