 |
Software for El Cheapo Modules: GY-68 (BMP180)
The sample sketch described in El Cheapo Modules 11 (December 2017) called "SFE_BMP180_barometer_sketch.ino" for use with BMP180-based modules on Arduino and the sample BASIC program called "BMP180 barometer check prog.bas" for the Micromite.
The other file described in the article "SFE_BMP180.zip" can be found at: https://github.com/sparkfun/BMP180_Breakout
Or here: https://github.com/sparkfun/BMP180_Breakout_Arduino_Library
|
 |
GY-68 Barometric Pressure/Altitude/Temperature I²C Sensor breakout board
A tiny breakout board with a BMP180 barometric pressure/altitude/temperature sensor plus a regulator and level shifter. Connects easily to an Arduino, Micromite, etc using the I²C bus via a standard 4-pin header. For more information, see the GY-68 and BMP180 data sheets.
|
 |
GY-BM BMP280 module
GY-BMP280 Barometric Pressure/Altitude/Temperature I²C Sensor breakout board
A tiny breakout board with a BMP280 barometric pressure/altitude/temperature sensor plus a regulator and level shifter. Connects easily to an Arduino, Micromite, etc using the I²C bus via a 6-pin header. For more information, see the BMP280 data sheet.
|
 |
GY-BME280 Barometric Pressure/Altitude/Temperature/Humidity I²C Sensor breakout board
A tiny breakout board with a BME280 barometric pressure/altitude/temperature/humidity sensor plus a regulator and level shifter. Connects easily to an Arduino, Micromite, etc using the I²C bus via a standard 4-pin header. For more information, see the BME280 data sheet.
|
|
GY-BME280 module (6-pin/3.3V version)
GY-BME280 Barometric Pressure/Altitude/Temperature/Humidity I²C Sensor breakout board
A tiny breakout board with a BME280 barometric pressure/altitude/temperature/humidity sensor plus a regulator and level shifter. Connects easily to an Arduino, Micromite, etc using the I²C bus via a 6-pin header. For more information, see the BME280 data sheet.
|
