 |
Software for Amazing Light Patterns for the LED Christmas Tree
A package of software for the LED Christmas Tree, including the Map program (written in Processing) along with several sample Arduino sketches (.ino files), showing how to create various patterns on your tree.
|
|
Arduino sketch (.ino) files and sample Python software for the LED Christmas Tree
A ZIP download which contains two sample Arduino sketches which can be used to display patterns on the Expandable LED Christmas Tree.
A Python sketch is also included which can be used to display patterns on the Christmas Tree when it is connected to your computer using the Digital Interface Module.
|
 |
Stackable LED Christmas Tree PCB [16107181]
Printed circuit board for building the Expandable LED Christmas Tree.
Double-sided PCB with plated through holes, solder mask and silkscreen overlay.
99 x 97mm.
Multiple PCBs can be stacked to make a bigger tree. There are discounts if you order many boards.
The price breaks are at four ($18 total), 18 ($72), 31 ($120) and 38 ($145).
|
 |
LED Christmas Tree PCB pattern (PDF download) [16107181]
PDF with the PCB design for the Expandable LED Christmas Tree (double-sided).
Both layers are in a single PDF.
|
 |
Kit for the Stackable LED Christmas Tree
A kit of parts to build a single board for the Expandable Christmas Tree. Includes the PCB, IC, capacitor, resistors, high-brightness LEDs (three green, three red and three white) and connectors.
As well as the specified 1kΩ resistors, we are including 820Ω and 220Ω resistors. These can be used with the white and red LEDs respectively, to better match their brightness to the green LEDs.
Refer to the November 2018 issue for assembly, set-up and operating instructions. The Digital Interface Module in the same issue can be used to drive the Tree (http://www.siliconchip.com.au/Shop/20/4750).
You will get a discount if you order more than one. Price breaks are at four ($32 total), 18 ($126), 31 ($199) and 38 ($229).
Note: photo shows assembled kit.
|
 |
Kit for the Digital Interface Module
A kit of parts to build the Digital Interface Module, as used to drive the Stackable Christmas Tree. Includes the PCB, programmed micro, capacitors, resistor and connectors.
Refer to the November 2018 issue for assembly, set-up and operating instructions.
Note: photo shows assembled kit.
|
