 |
Firmware (ASM and HEX) files for the Touch and IR Remote Control Trailing Edge Dimmer [1011119A.HEX]
HEX file and ASM source code for the 8-bit PIC12F617-I/P microcontroller in the Versatile Trailing Edge Dimmer with Touch and/or Infrared Remote Control project
Use the "A" version if you have the original version of the remote control, without white rings around the buttons, or the "B" version if you have the updated remote, which has dotted white lines around each button.
|
 |
Touch and IR Remote Control Trailing Edge Dimmer Main PCB [10111191]
Main PCB for the Versatile Trailing Edge Dimmer with Touch and/or Infrared Remote Control.
Note that you also need one Mounting PCB (10111192) to assemble this board.
Double-sided PCB with plated through holes, solder mask and silkscreen overlay.
66 x 104mm.
|
 |
Touch and IR Remote Control Trailing Edge Dimmer Mounting PCB [10111192]
Mounting PCB for the Versatile Trailing Edge Dimmer with Touch and/or Infrared Remote Control.
Double-sided PCB with plated through holes, solder mask and silkscreen overlay.
58.5 x 104mm.
|
 |
Touch and IR Remote Control Trailing Edge Dimmer Extension PCB [10111193]
Extension PCB for the Versatile Trailing Edge Dimmer with Touch and/or Infrared Remote Control.
Note that you also need one Mounting PCB (10111192) to assemble this board.
Double-sided PCB with plated through holes, solder mask and silkscreen overlay.
58.5 x 104mm.
|
 |
PIC12F617-I/P programmed for the Touch and IR Remote Control Trailing Edge Dimmer [1011119B.HEX]
A PIC12F617-I/P 8-bit microcontroller programmed with the firmware for the Versatile Trailing Edge Dimmer with Touch and/or Infrared Remote Control project (1011119B.HEX).
This revised version suits the currently sold version of the remote control, which has white dotted circles around each button.
If you have one of the older remotes without the circles, please select the "A" version instead.
|
 |
Touch and IR Remote Control Trailing Edge Dimmer PCB patterns (PDF download) [10111191-3]
PDF with the PCB designs for the Versatile Trailing Edge Dimmer with Touch and/or Infrared Remote Control (double-sided).
The main board (10111191) is double-sided while the mounting (10111192) and extension boards (10111193) are single-sided.
Both layers of the main board, plus the other two boards, are in a single PDF.
Note that due to the requirement for slots and the critical nature of the board shape and other factors, we don't suggest you make these boards yourself for safety reasons. This file is provided for reference purposes only.
|
 |
Warning label for the Touch and IR Remote Control Trailing Edge Dimmer (PDF download)
A PDF file with the high-voltage warning label.
This must be stuck to the blank plastic wall faceplate used in the Versatile Trailing Edge Dimmer with Touch and/or Infrared Remote Control project
|
 |
Hard-to-get parts for the Touch and IR Remote Control Trailing Edge Dimmer
A pack with two 4.7MΩ VR37 high-voltage resistors and two SiHB15N60E-GE3 SMD Mosfets, as required for the Versatile Trailing Edge Dimmer with Touch and/or Infrared Remote Control.
The rest of the parts should be available from your normal electronics retailer(s), with the possible exception of the infrared remote receiver and fresnel lens. Those optional components are available in our shop as a separate item (Cat SC4862).
|
 |
Infrared receiver parts for the Touch and IR Remote Control Trailing Edge Dimmer
A pack with the TSOP4136 infrared receiver and IML-0688 Fresnel lens required to add infrared remote control to the Versatile Trailing Edge Dimmer with Touch and/or Infrared Remote Control.
|
