 |
Software for the Digital Panel Meter/USB Display
The HEX file and MPLAB X project (.c) files for the Five-Way Panel Meter/USB Display.
|
 |
FJA4313OTU 15A NPN transistor
One 230V, 15A, 130W 30MHz NPN transistor in a TO-247 package.
As used in the SC200 audio amplifier and 45V, 8A High-power Linear Bench Supply (four required).
|
 |
LM317HVT regulator and INA282AIDR shunt monitor IC for 45V 8A Linear Bench Supply
A set of two parts that are currently hard to get for the High Current Linear Bench Supply project.
|
 |
45V/8A Linear Bench Supply PCB [18111181]
The main board for the 45V 8A Linear Power Supply.
Double-sided PCB with plated through holes, solder mask and silkscreen overlay.
150 x 120mm.
Note: some constructors have found it difficult to fit diodes D5 & D6. We believe this is due to a variation in lead thickness and body size between compatible parts. The next revision of the PCB will have larger holes spaced further apart to solve this. In the meantime, try to avoid diodes with particularly large bodies for these positions.
|
 |
Digital Panel Meter/USB Display PCB [18111182]
PCB for the Five-way Digital Panel Meter/USB Display.
Double-sided PCB with plated through holes, solder mask and silkscreen overlay.
55 x 36mm.
|
 |
PIC16F1459-I/P programmed for the Digital Panel Meter/USB Display [18111182A.HEX]
A PIC16F1459-I/P 8-bit microcontroller programmed with the firmware for the Five-way Panel Meter/USB Display (18111182A.HEX).
|
 |
High Power Linear Bench Supply PCB pattern (PDF download) [18111181]
A PDF with the PCB design for the High-power Linear Bench Supply (double-sided).
Both layers are in a single PDF.
|
 |
Digital Panel Meter/USB Display PCB pattern (PDF download) [18111182]
A PDF with the PCB design for the Five-way Digital Panel Meter/USB Display (double-sided).
Both layers are in a single PDF.
|
 |
High Power Linear Bench Supply panel artwork and drilling/cutting diagrams (PDF download)
A PDF of the front panel artwork for the 45V, 8A High-power Linear Bench Supply.
A separate PDF is included with all the drilling & cutting diagrams at actual size.
Note that both diagrams are 303mm wide, so neither can be printed on an A4 page at full size.
These diagrams have both been updated o 10/12/2019 to fix some things which weren't in the right place or didn't line up correctly, especially on the panel artwork.
|
 |
3mm acrylic heatsink spacer for High-power Linear Bench Supply
A 3mm thick plastic (acrylic) spacer, designed to go under the Bench Supply heatsink and insulate it from the case, while still providing secure mounting and also allowing good airflow through the bottom of the fins.
|
 |
3mm acrylic bezel for the Digital Panel Meter
A laser-cut black acrylic bezel to suit a typical 16x2 alphanumeric LCD module, as used in the Five-way Panel Meter project.
|
