 |
Firmware (ASM and HEX) files for the IR/UHF Link [1510713A/B.HEX]
HEX file and ASM source code for the PIC12F675-I/P microcontrollers in the IR-UHF Link project.
1510713A.HEX is for the IR-to-UHF Converter while 1510713B.HEX is for the UHF-to-IR Converter.
|
|
Firmware (ASM and HEX) files for the Revised Versatile 10-Channel Remote Control Receiver [1510613B.HEX]
HEX file and ASM source code for the PIC16F88-I/P microcontroller in the 10-Channel Remote Receiver (Revised).
This file is for the updated version which can accept both an IR receiver and 433MHz UHF receiver simultaneously. It is used either with a modified version of the original PCB (coded 15106131) or the updated PCB (coded 15106133).
|
 |
Infrared to UHF Converter PCB [15107131]
PCB for the Infrared Remote Control to UHF Converter.
Double-sided PCB with plated through holes, solder mask and silkscreen overlay.
20.5 x 47mm. Fits inside an existing infrared remote control so that it can transmit RF on 433MHz.
|
 |
UHF to Infrared Converter PCB [15107132]
PCB for the UHF to Infrared Remote Converter.
Double-sided PCB with plated through holes, solder mask and silkscreen overlay.
79 x 47mm. Has corner cut-outs to fit into jiffy box. Normally used in combination with the IR-to-UHF Converter.
|
 |
Revised 10-Channel Remote Control Receiver PCB [15106133]
Updated PCB for the 10 Channel Remote Control Receiver. Allows simultaneous use of IR and UHF receivers. Otherwise identical to the original version (15106131).
Remember to use the updated software with this board (1510613B).
Double-sided PCB with plated through holes, solder mask and silkscreen overlay.
123 x 61mm.
|
 |
PIC12F675-I/P programmed for the IR-to-UHF Converter [1510713A.HEX]
A PIC12F675-I/P 8-bit microcontroller programmed for the Infrared to UHF Converter (UHF Link), July 2013.
|
|
PIC12F675-I/P programmed for the UHF-to-IR Converter [1510713B.HEX]
A PIC12F675-I/P 8-bit microcontroller programmed for the UHF to Infrared Converter (UHF Link), July 2013.
|
 |
PIC16F88-I/P programmed for the revised 10-Channel Remote Control Receiver [1510613B.HEX]
A PIC16F88-I/P 8-bit microcontroller programmed for the updated 10-Channel Remote Receiver (1510613B.HEX).
This version suits the updated PCB only and allows both the infrared and 433MHz UHF receivers to be fitted simultaneously.
|
 |
IR/UHF Link PCB patterns (PDF download) [15107131/2]
PDFs with the PCB designs for the IR-to-UHF converter (that goes inside the remote control) and the companion UHF-to-IR converter unit.
Both boards are double-sided designs and each PDF contains both layers. The IR-to-UHF converter board is coded 15107131 while the UHF-to-IR converter is coded 15107132.
|
 |
10-Channel Remote Control Receiver revised PCB pattern (PDF download) [15106133]
PDF with the revised 10-channel Remote Receiver design (double-sided).
This version can accept an IR receiver and 433MHz UHF receiver simultaneously. New constructors are advised to use this version as it has no disadvantages compared to the original. Remember to use the updated software with this board (1510613B).
Both sides are in a single PDF file.
|
 |
Infrared/UHF Link lid panel artwork (PDF download)
Lid panel artwork for the UHF-to-IR Converter. File contains two different styles of label to choose from.
|
