 |
Currawong 2 x 10W Stereo Valve Amplifier top cover cutting diagram
Cutting details for the top cover of the Currawong Stereo Valve Amplifier.
Each file contains the paths to cut to make a top cover and can be fed to a laser cutter.
The overall dimensions are 289.56 x 285.75mm and you should check this before proceeding with cutting as there can sometimes be scaling issues when importing these files.
|
 |
Firmware and source code for the Currawong Remote Volume Control [0111114A.HEX]
PIC16F88 microcontroller firmware (HEX file) plus ASM source code for the remote control unit to suit the Currawong 2 x 10W Stereo Valve Amplifier.
|
 |
Currawong 2 x 10W Stereo Valve Amplifier main PCB [01111141]
Main PCB for the Currawong Valve Amplifier.
2mm thick, double-sided PCB with plated through holes and plated/unplated slots, solder mask and silkscreen overlay.
272 x 255mm.
|
 |
Currawong Remote Control PCB [01111144]
PCB for the Currawong Stereo Valve Amplifier remote control option.
Double-sided PCB with plated through holes, solder mask and silkscreen overlay.
50 x 50mm.
|
 |
PIC16F88-I/P programmed for the Currawong Remote Volume Control [0111114A.HEX]
A PIC16F88-I/P 8-bit microcontroller programmed with the firmware for the remote control module in the Currawong 2 x 10W Stereo Valve Amplifier (0111114A.HEX).
|
 |
Currawong 2 x 10W Stereo Valve Amplifier main PCB pattern [01111141]
PDF with the PCB design for the Currawong Stereo Valve Amplifier (double-sided).
Both main board layers are in a single PDF, on separate pages. The remote control board pattern is also provided as a separate file.
Note that this would be virtually impossible to etch yourself, it's provided mainly as a reference.
|
 |
Currawong 2 x 10W Stereo Valve Amplifier panel artwork (PDF download)
PDF with artwork for the front and rear panels of the Currawong Stereo Valve Amplifier.
We can supply these panels pre-cut and printed; see the PCBs & Panels section of the Shop.
|
 |
Front & rear panels for the Currawong 2 x 10W Stereo Valve Amplifier [01111142/3]
Front and rear panels for the Currawong Stereo Valve Amplifier.
Each panel is made from a 1.6mm-thick PCB with black solder mask and white silkscreen printing. All holes and cut-outs are pre-made and the corners are rounded.
The front panel is 249 x 30mm and coded 01111142. The rear panel is 249 x 53.5mm and coded 0111143. Sold as a pair.
|
 |
Currawong 2 x 10W Stereo Valve Amplifier acrylic top cover
3mm thick clear acrylic top cover for the Currawong. Thirteen separate pieces are provided, all accurately laser cut:
- Top cover with holes for valves, output transformers, vents and mounting
- Front cover panel which glues into slots on the top cover
- Transformer shield pieces which also glue into slots on the top cover
- Seven 3mm cylindrical spacers for mounting
290 x 286mm total size.
|
